Decoration tiles are one of the main building materials that are indispensable. Living room floors, kitchens, bathrooms, balconies and other spaces often use it. When tiling, the construction process is stressful, and good craftsmanship can not only make you The smart interior space will save you a lot of money. In this issue of home improvement classroom, you should pay attention to the following aspects when revealing the secret tile.
Mona Lisa Tiles
1. First, clean the back of the pre-selected tiles and soak them for more than 2 hours. The purpose of soaking water is to let the tiles absorb moisture in advance, so as to avoid the moisture in the adhesive material after the plastering, affect the adhesive strength or cause excessive shrinkage of the adhesive material to cause hollowing, de-bonding, and the like. After the tile is immersed in water, it should be taken out from the water before being applied, and the surface moisture can be wiped off with a cotton cloth or the surface moisture can be dried before paving.
2. Before the paving begins, a vertical line should be hung on the wall leveling layer to determine the wall size line of the tile and pull the horizontal line so that the surface can be flat and the tile can be horizontally and vertically.
3. When laying a tile, use a horizontal line as the basis, and set a wooden pallet that supports the tile. The purpose is to prevent the tiles from falling or displacing before the bonding material has hardened to build strength.
4. Paving tiles generally start from the outside corner or from the edge of the door and window, and proceed from bottom to top and from left to right.
The method of laying is as follows: wet the screed with water, apply the spliced ​​material to the back of the tile with a small trowel, and then apply the tile to the wall and tap it with a spade with a wooden handle or a rubber hoe. Tiles, so that the adhesive material is full of gaps between the tiles and the wall, pay attention to the top of the tile. The mouth should be aligned with the horizontal line. If it is uneven, you can adjust it by placing a small piece of wood under the tile. After finishing a full row, check whether the wall surface is flat by using a ruler. If it is not flat, you should knock out the raised tile and remove the paste from the recessed tile.
Bonding materials should not be too thick, otherwise it is not easy to spread, but also should not be too thin, otherwise tile paste can not be fixed, easy to fall down.
5. According to the entire glazed brick wall contamination, scrub the surface with 10% dilute hydrochloric acid solution or tap water. If you use a diluted hydrochloric acid solution, rinse it thoroughly with tap water.
We must also remind the owners that the corners on the walls should be covered with corner tiles, and the inner corners should also be tiled with corner tiles in order to form a beautiful circular arc at the corners. But now people generally for the convenience of the map, the general use of tiles directly touch the angle of the sun corner treatment, the inside corner is generally not to do any treatment.
Tile Tile Space Effect Picture Space Interior Decoration Home Furnishing Window Decoration Living Room Floor Tile Bathroom Door Size Bathroom Tile Bathroom Size Toilet Door Tile Floor Tile Tile Balcony Tile Kitchen Tile
Packaging density meter, printing density meter, high-precision density meter
CHNSpec Technology (Zhejiang)Co.,Ltd , https://www.chnspec360.com