Sound box diesel generator correct switch steps

The correct on/off operation of the silent diesel generator can not only increase the service life of the generator set, but also greatly reduce the failure rate of the generator set and improve the working efficiency of the silent diesel generator. The details determine success or failure, a small operation step, It may bring a series of problems. The following small series summarizes the steps for Hansa's silent diesel generator to turn on and off correctly. I hope to help everyone:

First, silent diesel generator manual operation steps:

1. Silent diesel generator manual start: After the test alarm system is normal, after the control switch is cut to the manual (MAN) position, the generator set can start automatically.

2. Silent Diesel Generator Parking: Stop the generator by turning the control switch to the STOP position or pressing the red emergency stop button. In case of emergency, the emergency stop button can be pressed directly to force the stop. If the red emergency stop button is depressed, it must be reset in place, otherwise the generator will not start.

Second, silent diesel generator automatic switching control operator steps:

1. Cut the control switch to AUTO and cooperate with the automatic switch (ATS). The control switch must also be placed in the automatic position. When the mains stops, A·T·S will give the start signal to the generator. System, the generator will start automatically.

2. When the control switch is cut to stop (STOP), or it is still in auto, but ATS is sending a stop signal when the utility power is restored, the generator will stop automatically. Note: When the generator in operation is automatically stopped due to faults (over-speed, high water temperature, low oil pressure, etc.), the fault reset button must be pressed after troubleshooting to prepare for restart.