Many owners have said that it is easy to appear empty after the tiles are laid. If it is serious, there will be tiles falling off, which will not only affect the beauty of the home, but also have a hidden danger. Therefore, the acceptance of the tile paving is very important. The following small series teaches you how to check the empty tiles.
1. Tile empty drum inspection method
Use a small iron rod to strike each tile, and judge whether the tile is empty by the sound of the tap. If the sound of the tapping is rather dull, it means that the paving is more solid. On the other hand, if the sound of "clam" is crisp, it means that the wall tiles are not laid firmly and there is an empty drum.
2, empty drum reasons and preventive measures
The appearance of empty tiles is largely caused by improper construction. When the tiles are laid, the mortar of the cement mortar is thin, the cement slurry is dry when the tiles are laid, and the pollutants on the back of the plates are not removed. Caused the tile to be empty. Therefore, it is necessary to prevent the occurrence of empty drums during construction, and the adhesive layer mortar should be dry, which is subject to the grounding spread. The water-cement ratio of cement slurry is 1:2 (volume ratio) when paving, and it is strictly forbidden to use cement flour. During the curing period, the board should be erected and it is forbidden to walk on the surface.
3, tile empty drum rate standard
The floor tile hollowing phenomenon is controlled within 3%, and no empty drums can be found on the main passage; while the wall tile hollow drums need to be controlled within 5%.
4, tile hollow drum treatment
If a single tile is over the standard, the paving worker can be asked to resurfacing the brick. The method is to take out the empty floor tiles, suck them with suction cups, hang them straight, and then lay them out according to the specifications.
If more than 1/3 of the paved area has empty drums, then the entire surface of the tiles needs to be removed and re-paved. In general, the damage caused by the construction party should be borne by the construction party for the cost of ceramic tile damage and artificial accessories.
Summary of Jiuzheng Building Materials Network: Tile empty drum is a relatively common problem, and it is also the most headache for the owners. Know the methods of acceptance and help you to ensure the quality of the decoration.
Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.
BBQ Grate,BBQ Mesh,BBQ Grill, grill grate,grill mesh
Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com