The garden light is mainly composed of 4 major components, namely:
light source
Light source is an important part of all lighting products. According to different illuminance requirements, different brands and different types of light sources can be selected. Commonly used light sources are: incandescent lamps, energy-saving lamps, fluorescent lamps, sodium lamps, metal halide lamps, ceramic metal halide lamps, And new LED light source.
Lamps
The reflector of more than 80% of the lamp, the transparent cover with a light transmittance of more than 90%, a high IP level to prevent the penetration of mosquitoes and rain, and a reasonable light distribution lampshade and internal structure to prevent glare from affecting pedestrians and vehicles Safety. , Cutting line 2, welding lamp beads 3, making lamp board 4, measuring lamp board 5, coated with thermal grease 6, fixing lamp board 7, welding wire 8, fixing reflector 9, installing glass cover 10, installing plug 11, Connect the power cord 12, test, aging 13, inspection, labeling 14, packing, and storage.
Light pole
The main materials of courtyard lampposts are: equal-diameter steel tube, heterosexual steel tube, equal-diameter aluminum tube, cast aluminum lamppost, aluminum alloy lamppost. Commonly used diameters are Φ60, Φ76, Φ89, Φ100, Φ114, Φ140, Φ165, and the thickness of the selected material is divided into: wall thickness 2.5, wall thickness 3.0, wall thickness 3.5 according to the height and the location used. (The above is the regular size)
basis
The flange is an important component for the installation of the garden light pole and the ground. Installation method of courtyard lights: Before installing the courtyard lights, you need to use M16 or M20 (common specifications) screws to weld into the basic cage according to the standard flange size provided by the manufacturer, and then excavate the pit of the appropriate size at the installation site and put the basic cage Placed in it, after horizontal correction, use cement concrete to irrigate to fix the foundation cage, and after 3-7 days, the cement concrete is fully solidified, and the courtyard lamp can be installed. (Note: When pouring the foundation of the courtyard lamp, it is necessary to lead the embedded pipeline
China Street Light Procurement Network http: //
IN WALL MOUNTED BATH MIXER
Concealed faucet is composed of embedded parts + panel + nozzle + handle and other accessories, first of all, the concealed faucet should be pre-laid with the pipeline, the pipeline is laid before do not connect the valve body, to drain first, because there is decoration sand and dust in the pipeline; After draining the water, connect the valve body to test the water and water pressure, and it will be OK if there is no problem. The wall is laid in the back, and then the external parts are connected. In case of damage, the valve core is broken, and it is the same as replacing the valve core with an ordinary faucet.
IN WALL MOUNTED BATH MIXER,Bathroom Faucet Taps,Shower Sink Mixer,Faucet Sink Mixer
WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com