Owners and friends will choose the integrated ceiling when decorating the bathroom, because the integrated ceiling can be waterproof or aesthetically pleasing, so it is popular among the mass consumers. However, the situation of each bathroom is different. When installing, I don’t know how high the integrated ceiling should be installed. Then the small series will explain the height standard of the integrated ceiling of the bathroom:
1. The height of the ceiling depends on the lowest point of the sewer pipe on the top of your bathroom. If the ceiling is as high as possible, at least the lowest point of the upper water pipe should be covered, and then the position of the exhaust fan and the exhaust fan should be considered.
2, the bathroom integrated ceiling height and the size of the bathroom are related, if the bathroom is relatively large, the ceiling is too high, it will appear empty, a bit cold feeling. If the bathroom is small and the ceiling is high, the tiger will appear depressed and crowded. Therefore, the height of the ceiling should be adjusted according to the size of the bathroom. Under normal circumstances, the height of the bathroom is equivalent to other rooms, and the height of the ceiling can be designed between 2.2 meters and 2.4 meters.
3, the ceiling height should also consider the installation distance of pipelines, Yuba, lamps and so on. Generally, if there is no beam, 150mm is enough, plus the ground pipeline, waterproof layer, waterproof protective layer, tile overlay layer, tile surface layer, etc. need 50-60mm height, such living space height is about 2.35-2.4m about.
4, in terms of visual effects, the bathroom is higher than the display, the spacious and bright feeling is the best. In addition to the attention to the integrated ceiling height, but also pay attention to the problem of color matching, the color of the entire space is well matched, which can give people a sense of visual spaciousness. Choose some light-colored ground, wall, and top materials, which look cleaner and appear more space. The color is not well matched, even if the layer height is higher, it will cause a sense of oppression.
5, from the general ceiling height, the family toilets in developed countries are mostly short, and in many domestic houses, the height of the bathroom is equal to other rooms, so in order to avoid empty, cold, the general integrated ceiling height can be designed in 2.2. Meter ~ 2.4 meters. When the area is more than 8 square meters, it is advisable to install a cosmetic cabinet above the wash basin, hang a storage box far away from the water source, or draw a place for daily dressing.
Jc001.load('news_ads'); jc001.newsAds.prints("5")
The check valve is used in the piping system, its main function is to prevent the backflow of the medium, prevent the pump and its driving motor from reversing, as well as the release of the medium in the container.
Check valves can also be used to feed pipes where the pressure may rise to exceed the pressure of the main system. Check valve according to the different material, can be applied to a variety of media pipeline.
The check valve is installed on the pipeline, which becomes one of the fluid components of the complete pipeline. The opening and closing process of the valve disc is affected by the transient flow state of the system in which it is located. In turn, the closing characteristics of the disc have an effect on the fluid flow state.
Check Valve,Hydraulic Check Valve,Check Valve Types,Ball Check Valve
WUXI KVC-VALVE , https://www.wxkaiweixi.com