The problem of Miss Li Xinshengyuan In the past few days, it rained, the windows had forgotten to close, and the rain outside the window had splashed in. Now that the floor is a mess, a large area is soaked. Please supervise the support and support!
 Supervision question Now in the rainy season, the time of high rainfall will bring a lot of rainwater. Many homeowners' homes will be wet due to improper use, and there will be worries about scrapping the arches. So what should be done to deal with the wooden floor that is soaked in water? Just happened to miss Miss Li's home. Let's answer it for you today!
Part1: Large area soaking
one
Solid wood and parquet flooringThe solid wood floor has a large coefficient of moisture expansion, and once the water vapor enters the interior of the floor, it will cause bending deformation. Therefore, if there is a large area of ​​water soaked in the floor, it is difficult to solve the problem by drying the surface moisture. It is best to pick up the floor and reinstall it. It is advisable to promptly notify the after-sales service department of the floor and request the manufacturer to provide a solution.
The correct treatment method: first carefully pick up the floor, as soon as possible to dry the surface of the water, and then press the "well" shape overlay placed, using the weight of the laminate to prevent the occurrence of floor deformation. When placing, pay attention to the opposite side of the floor. In addition, these floors should be dried in a ventilated place and not exposed to the sun.
Although the expansion coefficient after the soaking of the composite floor is not as high as the solid wood floor, it needs to be handled with care. For the case of large-area soaking, similar to the treatment of solid wood flooring, it is better to remove the skirting line around the composite floorboard as soon as possible, and lift the submerged floor, use bricks or other things to raise the floor, and stack the floor with the word “wellâ€. Put it dry. In general, good quality laminate flooring can be paved after being dried.
two
Laminate flooring for large area soaking treatmentIf the laminate flooring is not wet for more than 12 hours, you can remove the furniture on the floor and dry the water stains on the floor surface with a dry rag. Then remove the baseboard of the floor, exposing the expansion joints, and drain the water vapor by the expansion joints. According to the amount of water, it usually takes about 7 days to 15 days to dry. If it can not be restored after 15 days, it should be considered again. Replaced.
Xiao Bian reminded: For bamboo flooring and cork flooring, its moisture-proof waterproofing is better, and the large-area foaming water treatment method is similar to that of strengthening the floor. This is not detailed here.
three
Large area soaked water floor treatment matters needing attention1. The floor where the water is too long should be replaced directly
If the floor is soaked for too long, or even if it has been warped and deformed, it is best to knock out the floor and resurface the new floor. In order to save money, some owners flatten the arched part directly and then paint it again. This practice is only for a moment, because the thickness of the floor is not appropriate and the stress is different.
2, After the shade dry floor re-paving considerations
After a large area of ​​water soaked in the floor, if there is no major problem, it can be re-paved. However, care must be taken to ensure that the floor is dry before resurfacing. If there is a keel, it is necessary to wait for the keel to be completely dried; and if it is directly laid, it is advisable to wait for the cement floor to re-emit white.
Flooring Flooring Wood Flooring
Hpl Engineered Doors ,Engineered Wood Door,Engineered Oak Doors,Engineered Oak External Doors
Foshan QI'AN Fireproof Shutter Doors Co., Ltd , https://www.qianfiredoors.com