In the home improvement, there is nothing in the clear bag and half bag. If it is all-inclusive, the most fear is that the construction unit shoddy, and cut corners. Looking at some decoration disputes, such things are common in the decoration industry. The ultimate victim is our pretend property owners. So, how can we avoid the construction unit shoddy, cut corners? As an owner, whether it is a pre-renovation inspection or a construction process, it is necessary to be aware of autumnal matters and avoid self-employment.
| Â Ground construction is the key to cutting corners |
In all the projects of home renovation, the floor decoration is a project that requires the owners to pay special attention. It is better not to have problems in this project because once there is a problem, the original floor or floor tiles will need to be dismantled to give the occupants a living. Bring great inconvenience.
First, find the ground: be careful "more and more uneven."
Frequent tricks: Some houses are not well-grounded and must be leveled to smooth the tiles and floors. But often there are some workers who are not careful, the process of leveling carelessness, resulting in the ground "more and more injustice," which will seriously affect the subsequent construction of the ground decoration.
Solution: In order to avoid the situation that the ground is “more and more unevenâ€, it is the best method to measure the flatness with a horizontal ruler during the decoration process. Leveling the ground before you can proceed with the next step.
Second, tile paving: The amount of cement should be reasonable
Common tricks: In the process of laying tiles, the workers are often cut corners and dropped off. The most common way of cutting corners and materials is when cement is applied only around the tiles or the cement ratio is not reasonable.
Solution: During construction, workers must follow up on the situation of tiling and avoid cutting corners. Tiling bricks are generally used in a ratio of 2:1. When laying, you must apply cement to the entire tile. After paving, you must check the empty condition of the tiles and find that empty drums should be repaved immediately.
Third, floor paving: height difference with floor tiles
Common tricks: If the living room and bedroom are tiled with floor tiles, it is easy to cause height differences after laying because of construction workers' negligence. The floor is often higher than the floor tiles, which seriously affects the appearance and usability.
Solution: In the installation of floor and paving tiles, we must plan well, estimate the height after paving, find the ground or lay the construction of the keel to make the surface as flat as possible to reduce the height difference.
Home decoration tricky decoration tricky decoration trap
Work Light,Work Lamp,Portable Work Light,Outdoor Work Lights
Cangnan Younglite Electrical Co., Ltd. , https://www.younglitetec.com