The main application areas of LLDPE are agricultural film, packaging film , wire and cable, pipe, coated products and so on.
Linear low-density polyethylene is mainly used for the production of thin films due to its high tensile strength, good puncture resistance and tear resistance. In 2005, the world's LLDPE consumption was 16.17 million tons, a year-on-year increase of 6.4%. In the consumption structure, film products still accounted for the largest proportion, consumption was 11.9 million tons, accounting for 73.6% of total consumption, followed by injection molding, consumption of 1.148 million tons, accounting for 7.1% of total LLDPE consumption.
In 2005, the total consumption of LLDPE and LDPE in China was 5.98 million tons, of which LLDPE consumption was 3.55 million tons, up 25.4% year-on-year, accounting for 59.4% of total LLDPE/LDPE consumption; LDPE consumption was 2.43 million tons, up year-on-year. 0.7%, accounting for 40.6% of total LLDPE/LDPE consumption.
From the consumption structure of LLDPE/LDPE, film is still the largest variety of consumption, with consumption of 4.85 million tons, accounting for 77.5% of total LLDPE/LDPE consumption, including 3.13 million tons of packaging film, accounting for 50% of total consumption; The film is 1.345 million tons, accounting for 22.5% of the total consumption; the special packaging film is 376,000 tons, accounting for 6% of the total consumption. Followed by injection molding products, the consumption was 557,000 tons, accounting for 8.9% of the total consumption. It was followed by coated products, pipes and wires and cables. The consumption was 313,000 tons, 188,000 tons and 157,000 tons, respectively, accounting for 5%, 3% and 2.5% of the total consumption.
From the consumption of LLDPE/LDPE from 2003 to 2005, the consumption ratio of film has been maintained at around 77%, and the consumption ratio of the second largest variety of injection molded products has been 9%. It is expected that in the next two to three years, although the absolute consumption of various varieties will continue to grow, the proportion of consumption will basically maintain the current situation; as the demand for packaging film grows relatively fast, the consumption ratio of agricultural film will drop to 20%. about.
Jiuzhi Plastics Network
Linear low-density polyethylene is mainly used for the production of thin films due to its high tensile strength, good puncture resistance and tear resistance. In 2005, the world's LLDPE consumption was 16.17 million tons, a year-on-year increase of 6.4%. In the consumption structure, film products still accounted for the largest proportion, consumption was 11.9 million tons, accounting for 73.6% of total consumption, followed by injection molding, consumption of 1.148 million tons, accounting for 7.1% of total LLDPE consumption.
In 2005, the total consumption of LLDPE and LDPE in China was 5.98 million tons, of which LLDPE consumption was 3.55 million tons, up 25.4% year-on-year, accounting for 59.4% of total LLDPE/LDPE consumption; LDPE consumption was 2.43 million tons, up year-on-year. 0.7%, accounting for 40.6% of total LLDPE/LDPE consumption.
From the consumption structure of LLDPE/LDPE, film is still the largest variety of consumption, with consumption of 4.85 million tons, accounting for 77.5% of total LLDPE/LDPE consumption, including 3.13 million tons of packaging film, accounting for 50% of total consumption; The film is 1.345 million tons, accounting for 22.5% of the total consumption; the special packaging film is 376,000 tons, accounting for 6% of the total consumption. Followed by injection molding products, the consumption was 557,000 tons, accounting for 8.9% of the total consumption. It was followed by coated products, pipes and wires and cables. The consumption was 313,000 tons, 188,000 tons and 157,000 tons, respectively, accounting for 5%, 3% and 2.5% of the total consumption.
From the consumption of LLDPE/LDPE from 2003 to 2005, the consumption ratio of film has been maintained at around 77%, and the consumption ratio of the second largest variety of injection molded products has been 9%. It is expected that in the next two to three years, although the absolute consumption of various varieties will continue to grow, the proportion of consumption will basically maintain the current situation; as the demand for packaging film grows relatively fast, the consumption ratio of agricultural film will drop to 20%. about.
Jiuzhi Plastics Network
Stainless Steel Nails
Made of high-quality stainless steel.
Stainless steel nails for wooden furniture installation and maintenance, outdoor fence maintenance, etc.
It has good antiseptic effect, no rusting and no fear of damp.
For application of roofing systems and roofing components
Corrosive and high humidity environments
Recommended for longest life for galvanized sheet metal roofing and siding
Stainless Steel Nails,Smooth Shank Stainless Steel Nails,Screw Shank Stainless Steel Nails,Steel Nail
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.ironnailwiremesh.com