Dongguan Haoyin Hardware Products Co., Ltd. is a one-stop service enterprise integrating production, service, sales and after-sales. Welcome buyers to negotiate!
Thanks to the joint manufacturer of "safety electricity, safety switch, safety electrician" professional silver contacts (in-mold riveting parts), stamping parts, low-voltage switches (wall switches, leakage switches, etc.)! Thank you for your attention! ! Committed to providing users with the most comprehensive safety power detail service!
1. Installation of the starter First clean the armature and external drive mechanism with gasoline. After cleaning, see if the drive is flexible; when installing, graphite grease should be applied between the friction plates of the friction clutch, and the threaded filaments should be coated with organic oil; the starter is installed on the engine, and the distance between the end face of the drive gear and the plane of the flywheel is 3— 5 mm is preferred to ensure proper meshing of the gears.
2. The use of the starter does not exceed 5 seconds per start time, and the start time interval is 2-3 minutes. If it fails to start three times in a row, it should be checked and repaired; when starting in winter, the crankshaft must be turned several times before preheating 15 In about minutes, the motor can be started; the drive gear does not enter the ring gear and rotates at high speed. The start should be stopped quickly and restart after the motor stops. Immediately after the engine catches fire, release the button to return the drive gear to its original position.
3, the starter maintenance machine should be regularly checked for cleaning. Remove the dust cover and check the contact surface of the commutator with the carbon brush. The surface of the commutator should be smooth and clean, the contact surface should be greater than 85%, the carbon brush height should be no less than 7 mm, and the carbon brush spring pressure should be 8.8-12.7 Pa. If the surface of the commutator is not smooth, use “0†sandpaper to polish it. The carbon brush spring pressure should be adjusted or replaced below 8.8 Pa; check the surface of the electromagnetic switch contact. If there is burnt or black spot, use “0†sandpaper to wear off; check the excitation coil and line condition, and the internal rotation is not touched. hit.
Founded in 2005, Dongguan Yinyin Hardware Products Co., Ltd. specializes in: silver contacts, electrical contacts, double composite silver nails, riveted silver contacts, soldered silver contacts, various precision stampings, conductive copper posts, contacts Screws, electrical screws, DC, AC various pins, rivets, silver dots, binding posts, stamping parts and production of various silver, copper, iron, aluminum, non-show steel and other heterosexual products, electricity, mobile phone 13728192869, Mr. Chen
Popular keyword search relay contacts, composite contacts, switch contacts, silver contacts, silver contacts, double composite contacts, triple composite contacts, shaped contacts, electrical contacts, environmentally friendly contacts, in-mold riveting contacts , silver alloy contacts, rivet contacts, punching and riveting integrated contacts, solder contacts, riveting contacts
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
We focused on international export product development, production and sales. We have improved quality control processes of Crystal Roller Shutter Door to ensure each export qualified product.
If you want to know more about the products in Crystal Roller Shutter Door, please click the product details to view parameters, models, pictures, prices and other information about Crystal Roller Shutter Door.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Crystal Roller Shutter Door!
Commercial Rolling Up Door,Roller Shutter Door for Shop,Crystal Roller Shutter Door,Commercial Roller Shutter Doors
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com