1ã€Gap: Wood sealing line, corner line, waistline veneer meet seam less than 0.2mm, line and line clip corner joint not exceed 0.3mm, veneer and panel contact not exceed 0.2mm, sliding door entire surface error Not exceed 0.3mm.
2. Structure: Check if the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.
3. Corner: Check if the corner is accurate. The normal corners are all 90 degrees, except for special design factors.
4. Mosaic: Check whether the spell is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.
5. Modeling: Check whether arc and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape. It should ensure that the surface of the woodworking project is flat and there is no drum or breakage. Symmetrical carpentry projects should be symmetrical.
6, cabinet door: try the cabinet door switch is normal. When the door is open, it should be light and no noise.
7, nail holes: nails used in the ceiling structure, all need to be painted on the nail eyes put rust paint.
Space effect map tree paint space switch home paint paint cabinet door fashion small size
Thermostatic Concealed Valves,Thermostatic Shower Head,Hand Spray ​Shower Faucet,Ceiling Mounted Shower Faucets
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com