Modern urban life is busy and tense, and a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? With a little skill, you can easily create a pleasant home. Here you will find a series of fashion information from house decoration to home furnishings to help you have a relaxed and comfortable life.
Self-dosing agent. In a large pan, add soft soap, bleaching earth, 450 grams of soda, and 2270 ml of water, mix well, boil them to half of the original volume, then cool and store in a can. Use a hard brush to brush the smudges on the floor. It can usually be brushed along the floor, then washed with hot water and allowed to dry.
Salad oil, milk and tea. When wiping the floor, add a few drops of salad oil to the water to make the floor very bright. Or use a sour milk with a little vinegar, not only can be decontaminated, but also can be very bright. In addition, the dirt on the paint floor can be wiped off with strong tea juice. Wipe the smudges on the kitchen floor with burnt honeycomb ash, then smear the vinegar on the mop to wipe the floor, and it is easy to remove the smudges.
Concentrated alkaline water. The floor has grease traces such as grease, which can be washed with a boiled aqueous solution of concentrated alkaloids, then covered with smudges of dough mixed with bleaching earth and hot water, and kept clean for one night, repeat if necessary .
Salt. There are egg marks on the floor. You can sprinkle some salt on the egg stick. After 10-15 minutes, sweep the floor and the egg marks on the floor will be easily removed.
Tape and vacuum cleaner. The shards of glass scattered all over the floor are very dangerous. If it is visible to the naked eye, it will be glued with adhesive tape; if it is powdered, it should be sucked up with cotton water, or some rice grains should be sprinkled, glued up, and then sucked up with a vacuum cleaner. On the glass floor, you can also wipe it with a piece of wet soap. The glass shards will stick to the soap bar, scrape it off at any time and press it until it is finished.
candle. The remaining candle heads are stored. When a certain amount is collected, the wick is cut and removed, and the amount is added. The same amount of turpentine is added to the wax and placed in a pot containing cold water to boil. The candle is melted, stirred, poured into a tank and cooled for later use. In order to make the floor easy and effortless, the floor wax can be heated slightly before use.
Dongguan Best Instrument Technology Co., Ltd , https://www.best-tester.com