[China Aluminum Industry Network]: Purpose: To ensure that the extruded product meets the customer's requirements 2: The scope applies to any product squeezed by the company's extrusion plant. III: Responsibility 1. The production department is responsible for the self-inspection work, and the quality assurance department does a good job in sampling and inspection. Confirmation of various quality requirements.
2. The quality assurance officer is responsible for the inspection work in the production process of the product, and feedback on the presence of abnormal points four: extrusion inspection requirements, control 1. Measure the size of the product according to the requirements of the drawings and fill in the inspection record 2. The length of the joint material According to the schedule, the inspector shall perform the foam alkali testing in a timely manner and notify the site and the supervisor of the abnormality immediately. 3. The extrusion process of each product (material temperature, extrusion speed, and parameters of each table) shall be confirmed at any time according to the process card of each product. , Process Card 5: Precautions 1. The customer must have a special inspection request and the product inspector should promptly notify the site, provide corresponding inspection tools, and do a good job of inspection 2. Each product must be marked with the mold number when it is produced, and the mold replacement product should be Key testing 3. Quality assurance staff should be clear after the process of the process and requirements and report potential problems point of raw material inspection process one: The purpose is to ensure the success of production after the road, and to ensure product quality two: the scope applies to the company squeeze Raw materials used in the workshop
Compared with single-channel pipettes, multi-channel pipettes simplify all the tasks associated with microtiter plates that often occur in immunology, biochemistry, clinical diagnosis and food analysis. Multi-channel pipettes generally have 8 and 12 heads. The gun body can be rotated at 360°C, and each part can be disassembled and repaired separately. The lower half can be sterilized at 121°C. The dimpled housing ensures a firmer grip for the operator. Can be quickly calibrated.
how to use multi channel pipette,best multi channel pipette,multi channel pipette for 384 well plate
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedical.com