Leaf performance in the absence of wheat micronutrient

In the whole growth and development process of wheat, in addition to the large amount of NPK, other elements also play an important role in the growth and development of wheat. When it is insufficient, it has certain symptoms of deficiency. It is necessary to observe the wheat leaves and apply micro-fertilizer to ensure Wheat grows normally.

"Three-color" wrinkled leaves: When the wheat is deficient in zinc during the growing season, the leaf margin of the wheat leaves is shrunken or twisted, and the veins are greenish yellow to white on both sides, showing yellow, white, and green stripes, and the heading is late and the ear is Less granules, for this zinc deficiency, immediately sprayed with 0.3% to 0.4% zinc sulphate solution on the leaf surface for 2 to 3 times.

Yellow-leaf leaves: These leaves are caused by iron deficiency. At the beginning, the leaves of young leaves are green and yellow, the veins remain green, and they are completely chlorotic. Sometimes the whole leaves are yellow-white. For this, the surface can be sprayed 2 to 3 times with 0.75% to 0.9% of ferrous sulfate solution.

Yellow leaves with sharp white edges: the tip of the leaves turns white, and the edges are yellow-gray. These leaves are caused by copper deficiency. In severe cases, it is not possible to head at the heading stage. The control method is: foliar spraying with 0.03% to 0.04% copper sulfate solution for 2 to 3 times.

Soft drooping leaves: When wheat is deficient in manganese, the leaves are soft and drooping, and the veins turn from green to yellow. For this purpose, foliar application can be carried out twice with 0.1% manganese sulfate solution.

Yellow-white spotted leaves: When the wheat is deficient in molybdenum, the leaf color becomes lighter, and fine yellow-white spots appear along the veins in parallel, and gradually become linear or flaky, and finally the front part of the leaves is dried up. For the phenomenon caused by such molybdenum deficiency, the prevention and treatment method is: foliar spraying of 2 to 3 times with 0.05% to 0.1% ammonium molybdate solution.

Purple-brown leaves: When the wheat is deficient in boron, the growth period is delayed, and the leaf tips are purple-brown. At the same time, its flowers are not loose powder, pollen is less or deformed, sometimes there is no pollen, the ovary is laterally enlarged, the husk is not closed in the early stage, and it is withered in the later stage. It can be used for foliar application of 50-100 grams of boric acid and 50-60 kilograms of water, usually sprayed once in wheat seedling stage and beginning seeding stage. (Dongping County, City Technical Instructor Wang Guangdong)
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Reagent Bottles

Yongyue medical reagent bottles are made of high quality polypropylene PP/high density polyethylene HDPE raw materials, non-biotoxic, 100,000 grade purification workshop production environment production, multiple quality system certification to ensure free of DNase/RNase, heat source, endotoxin, sterilized plastic wide mouth reagent bottles using gamma ray sterilization, disassembled and ready to use, greatly improving user packaging efficiency.
Complete variety, 8ml, 15ml, 30ml, 60ml, 125ml, 150ml, 250ml, 500ml, 1000ml, transparent, native white and brown, reagent bottles amber have excellent light shielding function and can be used to store light sensitive substances.
Adopt professional leak-proof bottle mouth design, no need for inner cap or inner gasket protection, excellent sealing performance, 100% ensure no liquid leakage, wide mouth design, easy access to liquid.
Selection of imported high-quality raw materials, excellent physical and chemical indicators, with strong resistance to pressure, impact and acid resistance, polypropylene high temperature resistance of 121 ℃, high-density polyethylene HDPE low temperature resistance -40 ℃, and to meet the requirements of high temperature and autoclave processing.
The introduction of imported high-precision digital control production equipment, exquisite workmanship, comfortable feel, uniform bottle thickness, high gloss, no color difference, high uniformity between different batches.
The process adopts high-end molding technology and surface treatment technology, the inner and outer surfaces of plastic bottles are smooth, reagents do not hang on the wall, greatly reducing sample loss.
Provide professional customization service, with strong mold manufacturing capability, can provide customized products for users.


reagent bottles

Reagent Bottle,Plastic Reagent Bottles,Wide Mouth Reagent Bottles,Laboratory Reagent Bottles,Reagent Bottles Amber

Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuemedical.com

Posted on