Monel 400 Pipe with Good Corrosion Protection

Monel 400 Alloy Bar / Rod / Wire / Pipe With Corrosion Protection

Product Description

Monel 400/Alloy 400/Nickel 400/UNS N04400/Wr.No.2.4360

Shangahi Tankii Alloy Material Co., Ltd. is a manufacturer of various alloy wire and stainless steel with many years experience. Monel 400 Alloy is a kind of corrosion-resistant alloy. We can supply a full range of this material to fit your requirements.

Monel 400 Physical Properties

  Monel 400 Chemical Composition

Monel 400 Usage

Mainly used in  chemical, petrochemical,  oil exploration, nuclear industry, 

electronic industry and other fields.

 Monel 400 Corrosion resistance

 Monel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 has corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel

Monel 400 Application field

Monel 400 alloy is a multi-purpose material in many industrial applications:
1. Seamless water pipe in the power factory
2. Sea-water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude distillation
5. Sea-water in the use of equipment and propeller shaft
7. Manufacturing hydrochloric acid equipment used in the production of pump and valve

Monel 400 Standard

 

 

Vacuum rotary evaporator

The purpose of the rotary evaporator rotovap is to remove low boiling organic chemicals, usually solvents, from a mixture of compounds .

The rotary evaporator always for distillation and extraction under vacuum pressure . The motor runs the rotation flask moving and heating water oil bath pass hot energy to the mixture of rotary flask . Then low boiling point of mixture will be heated and form a thin film and make evaporation . The lower boiling point mixture make morphological change from liquid to Vapor or hot air . Then hot vapor meet condenser cooling coil then become liquid again and fall down to collection flask .

Water bath rotary evaporator 1L 2L 3L 5L 10L 20L 30L 50L glass flask

Vacuum Tester,Vacuum Evaporator,Vacuum Rotary Evaporator,Vacuum Rotating Experiment Device

Zhongyi Kori(Zhengzhou)Equipment Co.,Ltd , https://www.korireactor.com