Spline shaft characteristics application description spline shaft characteristics application note
Rectangular spline shafts Rectangular spline shafts are used in a wide range of applications such as aircraft, automobiles, tractors, machine tool manufacturing, agricultural machinery and general mechanical transmissions.
Its characteristics: multi-tooth work, high bearing capacity, good neutrality, good guiding, shallow root, low stress concentration, weak shaft and hub strength, easy processing, high precision with grinding method.
Involute spline shaft Spline processing method, there are many processing methods for spline shaft. Mainly used in the cutting process such as hobbing, milling and grinding, it can also be used in the cold deformation, cold rolling and other plastic deformation processing methods.
1. Rolling method: It is processed by the spline hob on the spline shaft milling machine or hobbing machine according to the forming method. This method has high productivity and precision and is suitable for mass production. 2. Milling method: The inter-tooth wheel is directly milled on a universal milling machine with a special forming cutter, and the indexing head is used for milling the teeth. If the milling cutter is not used, two disc milling cutters can also be used to simultaneously mill one tooth. On both sides, after milling by tooth, use a disc cutter to slightly trim the bottom diameter. The milling method has low productivity and precision, and is mainly used for processing spline shafts with outer diameter centering and roughing before hardening in single-piece small batch production. 3. Grinding method: Grinding spline flank and bottom diameter on a spline shaft grinding machine with a forming grinding wheel, suitable for processing hardened spline shafts or splines with higher precision, especially with inner diameter centering splines axis.
Http://news.chinawj.com.cn
Submission:
Aluminum Stub End has many advantages such as long service life, light weight, good heat resistance, good corrosion resistance, good heat preservation, high impact. According to the grad of the aluminum, it can be divided into Aluminum 1060 Stub End, Aluminum 5083 Stub End, Aluminum 6061 Stub End, Aluminum B241 Stub End.
Item Cold: aluminum stub end
Diameter: 1" 1.5" 2" 2.5" 3" 3.5" 4" 5" 6"
Wall thickness: 1.5mm,1.8mm,2.0mm,2.5mm
Surface treatment: Polish/Raw
Material: Aluminum 6061/ Aluminum 6063 /Aluminum 5083
MOQ: 50 pieces
Packing: Plastic bags and carton boxes
Aluminum Stub End
Aluminum Stub End, Aluminum 1060 Stub End, Aluminum 5083 Stub End, Aluminum 6061 Stub End, Aluminum B241 Stub End
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com