Home decoration is also a huge project for the average person. A variety of complicated procedures make people dazzled. In fact, the procedures are no longer complex. Just grasp the relationship between various processes and focus on understanding the decoration. Things will make people bypass one by one, today Xiao Bian also collected a lot of very useful decoration considerations, let's learn together.
Decoration notice 1,
Pay attention to the stacking and storage of materials. Semi-finished wood, wooden floor or just painted furniture, do not rush to find exposure to the sun, should pay attention to the air dry and dry place, naturally dry, otherwise not only the material is easy to deform, cracking, but also affect the quality of construction .
Decoration notice 2,
Be careful not to let the material get wet. In summer, the air humidity is high, and some materials that easily absorb moisture, such as wood boards, plates, and gypsum boards, are handled improperly during transportation or storage, and are easily exposed to moisture. The damp plate will have mildew. Because the shrinkage coefficient of the plate is large, the wooden keel and wooden device made of moisture-proof plates will be easily cracked and deformed after the air is gradually dried and the water in the material is volatilized, which will also affect other materials. Such as the use of sheet metal keel plasterboard ceiling, because the sheet shrinkage coefficient is greater than the plasterboard, wooden keel deformation directly after the cracks leading to the cracking of the plaster ceiling, greatly affecting the quality of home improvement. To avoid moisture in the material, place the material in a ventilated, dry place away from windows and water. If you have a good ventilation environment in your home and there is a place where you can put materials, you can buy back the easily-dampened materials that will be used sooner. The materials accumulated in the warehouse are generally damp, and they are ventilated and dry when they are returned home. This can ensure the material quality to a large extent.
Decoration Notes 3.
Pay attention to the finish of the finish. The paint is not allowed to dry too much before the tiles, tiles, and walls are attached. The general method of treatment is to first splash water, let it fully absorb water, and then use cement mortar or gypsum powder to make a bottom, in order to ensure the firmness of the paste.
Decoration Notes 4,
Note that there is room for wood flooring to stretch. When paving the solid wood flooring, it is necessary to take a good grasp of the inch, to leave a certain expansion coefficient for the solid wood floor, the floor gap is too large or too small will affect the pavement effect.
Decoration Note 5.
Pay attention to aftercare. After the well-prepared cement, 107 plastic or cement roof is completed, put some water on it every day for 35 days to prevent cracking.
Decoration Notes 6.
Pay attention to the rational use of chemical products. Before the construction, read the specifications of the used products such as glues, adhesives, paints and other chemical products. It must be constructed under the temperature and environment stated in the manual to ensure the stability of the quality of chemical products.
Decoration Notes 7,
Summer paint dries slowly, and the paint absorbs moisture from the air and creates a layer of matte. The general response is to use a drying agent to dry the paint faster. Summer home furnishings often encounter latex paint because it dries slowly, causing mildew in the hot air. The general solution is to open the air conditioner for the first week of the week and leave the furniture door open for ventilation. After the renovation, you will also encounter a variety of flavors that will not affect people's health. The home improvement company recommends putting a few pots of green plants and taking photosynthesis to remove odors.
Decoration note 8,
Do not rush to fix seasonal issues. In spring, the air humidity is high, and the wall, floor, and wooden furniture contain more water. In the summer, the air gradually becomes dry. At this time, problems may occur due to seasonal changes, such as the change of temperature and humidity, such as the shrinkage of the wooden floor, the increase in the gap between the board and the board, and the different materials of the wall and the door frame. Shrinkage varies, gaps appear; cracks appear on the walls... These are normal phenomena that occur during seasonal transitions. At this time, the moisture will continue to evaporate, and the wall may continue to crack. It is better to wait until the moisture on the wall is suitable for the external climate and then make another repair.
Decoration Note 9,
Wallpaper, paint should be dried naturally. Paints and wallpapers are commonly used decorative wall materials. In the spring, because of the dampness of the air, the doors and windows are open and airy to allow the walls to dry as quickly as possible. Summer is different, because of the dryness, so the wallpaper is usually soaked in water before paving, and then brushing paste. If you want to open doors and windows at this time, let wallpapers that have just been paved will be “dracued†and the wallpaper will shrink due to rapid loss of water.
Decoration notice 10.
Do not paint on rainy days. Experts suggest that when it comes to wood products, whether it is brush varnish or mixing oil, it is important not to brush on rainy days. On rainy days, the construction team must do some other work, or even suspend work for two days, and do not do paint work on rainy days.
Decoration note 11.
Pay attention to site safety. With less clothing in the summer, the body is prone to sweat, and labor protection is required to enter the construction site. Bare feet should not be used during construction to avoid stabbing the nails. Power off the installation when installing the circuit.
Decoration notice 12.
Moisture-proof, anti-exposure. The purchase of wood products in the summer includes the construction of large core boards for the main materials, white materials, shades, door lines, window frames, and skirting boards along the walls, all of which need to measure the moisture content of wood products. In the building materials market, general wood products franchise stores should have wood moisture measuring instruments. According to national regulations, the moisture content of standard plates cannot exceed 12%. Experts suggest that when purchasing materials in the rainy season, you can choose to dry some of them appropriately. When the material is put into the field, it should be left for a day or two so that it has the same humidity as the surrounding, so it is more suitable to use. In addition, the plates should be protected from strong sun exposure; in case of high humidity during rainy days, measures against moisture and deformation should be taken during storage. Do not leave plates and wood in direct sunlight. Exposure to sunlight will accelerate the aging of paints and glues used to decorate wood products. It is also necessary to prevent special attention in daily life by preventing rain from causing swelling and deformation of wood products and even mildew.
Decoration Note 13,
Diligent ventilation prevents home furnishings from contamination. In order to avoid being harmed during the "high incidence period" of summer decoration pollution, in addition to using non-toxic and less toxic decorative materials as far as possible, please complete the ventilation and air purification of the renovated room in addition to the formal home improvement company. When conditions permit, the room should be ventilated as much as possible; if there is no condition, indoor ventilation devices and air purification devices that can reduce indoor harmful gases can be used.
Summary: After reading so much information about decoration notices , everyone has a certain understanding of the minor problems in the decoration process. In fact, decoration is also a people-oriented project. According to the family's living habits, you will find that you will feel after staying in a new home. To more happiness.
Decoration notice
LED Therapy Light High Power, include 3 wattages, 300w 500w 1000w, 300w with 50pcs led, 500w with 1000cs led, 1000w with 200pcs led.
Why use led therapy light?
Red light therapy is a skin care treatment being offered as an alternative to physician-administered laser therapy.
Nost studies is involving red light therapy revolve around the treatment of acne, and of its ability ti get rid of wrinkle, while research is not yet conclusive on the benefits of red light therapy, studies suggest that concentrated red light is absorbed y the mitochondria in the cells and stimulates the generation of more collagen.
Red Light Therapy ,Rechargeable Led Face Light,Led Therapy Light,Red Light Infrared Full Body
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com