Problems arise in the use of the floor, and more than 50% of the problems are caused by improper paving, and only 5% are caused by the quality of the floor itself. From this we can know that the paving of the floor is the most important factor influencing the effectiveness of the floor. The owners should stop the following five major mistakes when laying floors.
Scholarly aesthetic floor   Flanner sofa
The project has a cross: During the construction, the floor is laid first, and then other constructions are performed on the floor. This is the usual practice of the current decoration team. However, after the floor is laid, it is necessary to paint for one month or even longer. During the period, no separation measures were taken for water vapor and chemicals on the floor and surrounding areas, which may lead to deformation and cracking of the wooden floor due to the rapid change in water content.
Firm with nails: The solid method of using wooden wedges and nails in construction will cause the nail holding force to be insufficient due to the wooden wedges and nails being too small. This can easily cause the looseness of the wooden keel and it will appear when trampling the floor. sound.
Too loose or too tight: As the temperature and humidity change, the wooden floor will shrink or shrink. Therefore, in the laying of the floor, should be based on the use of occasions, the level of temperature and humidity to reasonably arrange the tightness of the wood floor assembly. If it is too loose, there will be a large gap in the floor contraction, too tight, and the floor will be arched when it shrinks.
The keel is not moisture-proof: the moisture content of wood keels without drying is usually around 25%, and the moisture content of the wooden floor is generally 12%. The humidity difference is too high to cause the wooden floor to rapidly absorb moisture, causing the floor to arch and the paint to burst. .
The air is not leveled: The unevenness in the air will cause some floors and keels to hang, and the noise will be retracted when trampled.
Floor maintenance method
First, pay attention to maintenance details
After the wooden floor is installed and installed, the daily maintenance is the most important during the long-term use, which directly affects the service life of the floor. Some of the laminate floors that have been used for nearly a decade are still as good as new ones, while some have only two or three years of “serving†history but have “outstanding†flaws. The mystery among them lies in the word “maintenanceâ€.
Although the laminate flooring has many advantages such as wear resistance, corrosion resistance, pressure resistance, impact resistance, convenience for cleaning, care, and good dimensional stability, scientific maintenance cannot be neglected in use. Ruijia Flooring is a responsible company that guides the professionalization of the flooring industry in China. After carefully analyzing the status of consumer complaints over the years, it has found that a considerable number of problems are caused by improper use of the floor.
Laminate floor maintenance is easy to fall into two misunderstandings: First, excessive maintenance, such as waxing, or repeated repeated use of a very wet mop to repeat the mopping of the ground, are all wrong; Second, neglect of maintenance, long time unclean, do not pay attention to ventilation , The situation does not promptly report for repairs, such as a long time without repair after the drum, it will easily lead to Alice or even unable to repair. In response to this situation, Mr. Yuan Yide, the general manager of Ruijia, summarized the “three defenses†strategy for floor use and maintenance for consumers based on Ruijia’s service experience over the years. He said that as long as you understand the basics of floor use, strengthening the floor is not troublesome. By paying attention to relevant details in daily life, you can bring consumers a long-term peace of mind.
Second, strengthen the wooden floor maintenance
1. Always keep the floor dry and clean. Do not rinse with plenty of water. Take care to avoid prolonged submersion on the floor. If the floor has oil stains and stains, it is necessary to pay attention to the timely removal, you can use a soft home neutral detergent heating water treatment, it is best to use the floor with a dedicated floor cleaning protection fluid to clean. Do not use alkaline water, soapy water and other corrosive liquids to contact the surface of the floor, and do not use the flammable materials such as gasoline and other high-temperature liquids to wipe the floor.
2. It is not necessary to wax and paint laminate flooring, and avoid sanding and polishing. Because laminate flooring is different from solid wood flooring, its surface is inherently smooth and its brightness is relatively good. The wear resistance of laminate flooring is also quite good. We only need to follow the first step to achieve long-term maintenance.
3. It is advisable to place a mattress at the entrance to prevent dust particles from entering the floor and damage the floor. Overweight items should be placed on a stable basis. Do not drag and drop furniture while lifting.
4. Floor stains and grease should be cleaned with household cleaners. Do not use large amounts of water to clean the floor. When the floor surface is stained, it can be dried with a damp mop that does not drip. If you get chocolate, oil, juice, drinks, etc., just wipe with warm water and a neutral detergent. If it is contaminated with lipstick, crayons, ink, etc., it can be gently wiped with methanol or acetone.
5. Dry areas in the north, in the winter should pay attention to increase the humidity of the floor surface, mop the ground with a damp mop, appropriately increase the surface humidity, can effectively solve the floor cracks and cracks. If there are cracks in individual locations, please inform the sales organization in time and fill in the parts. After filling, the surface humidity should be appropriately increased to facilitate floor recovery.
Third, bamboo floor maintenance
First of all, keep the indoor dry humidity. Although the bamboo flooring is dried, it reduces the dimensional changes. However, because bamboo is a natural material, the bamboo flooring will also be deformed due to the change of the dryness and humidity of the climate; if the drying season occurs in the north, especially when the heating is turned on, Consumers can adjust humidity through different methods, such as using a humidifier or placing potted water on the heating, etc.; in the rainy season in the southern region, consumers should open more windows to ventilate and keep the room dry; at the same time, bamboo flooring should be used indoors. Avoid contact with large amounts of water. If water spills onto the floor, it should be wiped dry and cleaned.
Second, avoid damaging the floor surface. Bamboo floor paint should avoid hard impact, sharp scratches, metal friction, etc. Prevent dust, sand, and other objects from entering the room. This can place a doormat in the doorway, but the insole must be kept clean. Do not scratch the surface of the bamboo board with a spike or wear a shoe with a metal spike to enter the room. You can use some fiber fabrics to wrap the feet of the furniture. This will not only make it easier to move the furniture, but also make the furniture not damage the floor.
Finally, the floor should be cleaned properly. In the daily use, keep the bamboo flooring clean and clean, use a clean broom to sweep, and then use a wrung mop to drag, usually with a soft damp cloth to gently wipe the floor, of course, can also be treated like a carpet, remove with a vacuum cleaner Dust on the floor. According to the use conditions, it can be waxed once every few years to keep the paint film smooth and smooth. If conditions permit, floor waxes can be applied to the surface of the bamboo floor in 2 to 3 months, which will provide better maintenance.
In addition, you need to open the window to change the air, adjust the indoor air temperature.
Fourth, solid wood floor maintenance
1. Keep the floor dry and clean. Do not allow the mop to be wetted with water or scrubbed with alkaline water or soapy water so as not to damage the brightness of the paint and damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop. Wax once a month (or two months) (wipe the water vapor and smudges before waxing).
2. In the event of heating or other leaks on the ground, they must be wiped clean in time. Do not directly use the sun or electric oven baking, so as not to dry too fast, cracking the floor.
3. The painted floor cannot be used for a long period of time. Do not cover it with plastic sheets or newspapers. After a long time, the paint film will become sticky and lose luster. Also avoid hot water basins, hot pots and other objects directly on the floor. Use a wooden board or a mat to protect it from damage.
4. Inadvertently stained parts of the board should be promptly removed. If there are traces of oil that can be wiped with a rag or mop, warm water or a small amount of detergent, use a neutral soapy water and a little scrubber to scrub. If the stain is serious, this method is ineffective and can be wiped with high quality sandpaper or steel wool. If it is a smear of a drug, beverage or pigment, it must be removed before the stain has penetrated the wooden surface. The cleaning method is to wipe it with a soft cloth dipped in furniture wax. If it is still ineffective, it must be rubbed with steel wool and furniture wax. If the surface of the floor is damaged by cigarettes, wipe it with a soft cloth impregnated with furniture wax to restore light. If it is contaminated with ink, it should be wiped with a soft wax dip cloth in time. If it is ineffective, it can be wiped with steel wool and furniture wax.
5. After laying the paint floor, try to reduce the direct sun, so as not to paint too much ultraviolet radiation, premature cracking and aging. Put furniture application rubber or other soft objects on the floor to avoid scratching the floor paint.
6. During the use of the floor, if individual floors are found to be warped or detached, the floor should be taken in time to remove the old glue and ash, apply new glue, and compact; if the individual floor paint film is damaged or white, 400 can be used. Water sandpaper, soap, and water are sanded, then wiped clean, and after drying, a local complementary color is obtained. After the color is dry, a brush is applied. After 24 hours, polish it with a 400-grit water sandpaper, and then polish the wax.
Fifth, composite wood floor maintenance
The economical and practical composite wood floor has become the main choice for the ground decoration of the people's bedroom. Proper use and attention to maintenance can extend the life of the laminate flooring.
The method of maintaining composite wood floors is simple. You can usually use a vacuum cleaner or a broom to clean the surface of the dust, and then use a cloth or mop that has been soaked and wrung out until it does not drip. After the floor is mopped, it is best to open doors and windows to allow the air to circulate and dry the floor as quickly as possible.
If the composite wood floor wear layer is damaged, the moisture resistance and brightness of the floor will be affected. Therefore, when walking on the floor, it is best to wear cloth slippers, preferably barefoot. A soft-bottomed protective pad is attached to the furniture feet to prevent the furniture from scratching the floor wear layer, so that heavy items do not damage the wear layer. Do not use sandpaper, sanders, steel brushes, strong detergents or metal tools to clean laminate flooring. If you have a cat in your home, you need to find a solution to the destruction of cat claws.
Here's a tip for cleaning a light-colored composite wood floor: Use a rag to scoop up the tap water and wipe it directly on the floor, or spray the rice water evenly on the wooden floor (not too much) and wipe it with a dry rag for 5 minutes. The floor will be much cleaner.
Special stains cleaning: Oil stains, paints, and inks can be wiped with a special stain-removing oil; stains such as blood stains, juices, red wine, and beer are wiped with a damp cloth or a suitable amount of floor cleaner with a rag; wax and chewing gum with ice cubes Put it on top for a while, let it freeze and shrink, and then gently scrape it, then wipe it with a damp cloth or with a rag and a suitable amount of floor cleaner. It is not possible to clean composite wood floors with strong acid-base liquids.
Flooring Home Maintenance Nature Flooring Paint Furniture Heating Window Room Function Sofa Bed Cloth Sofa Function Sofa
Galvanized Roller Shutter Door
Using advanced hot-dip galvanized material , precision roll forming production process, polyurethane foam that free of hydrofluorocarbon inside door, light weight, high strength, appearance nice. The doors have advantages of tamper anti-theft , noise isolation thermal insulation and corrosion resistance;the doors are widely used in shops, garages, houses, supermarkets, warehouses and industrial plants,etc.
Depending on the characteristics of the buildings,we can choose interior, exterior and intermediate three different installation ways, doors stay in the upper part of door after rolling up , this could save garage space, and also could keep the garage clean and beautiful by prevent the mud, rain and snow ,etc going into the garage.
Galvanized Roller Shutter Door,Standard Galvanized Roller Shutter Door,Automatic Galvanized Roller Shutter Door,Steel Roller Shutter Safe Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.spiralfastdoor.com