There are many reasons for the vibration of hydraulic oil pump motors. Motors with a large pole number of more than 8 poles will not cause vibrations due to motor manufacturing quality problems. Vibration is common in 2- to 6-pole motors, so what are the causes of their vibration? Check it out with Dalan Motor!
1. Qualification standard of motor vibration value:
(1) For a rotating machine with a rated speed below 750r / min, the bearing vibration value does not exceed 0.12mm;
(2) For a rotating machine with a rated speed of 1000r / min, the vibration value of the bearing does not exceed 0.10mm;
(3) For a rotating machine with a rated speed of 1500r / min, the bearing vibration value does not exceed 0.085mm;
(4) For a rotating machine with a rated speed of 3000r / min, the bearing vibration value does not exceed 0.05mm.
2. Ten Reasons for Motor Vibration
1. The rotor, coupler, coupling, transmission wheel (brake wheel) is caused by imbalance.
2. The iron core bracket is loose, the oblique key and pin are invalid and loose, and the rotor is not tightly bound, which will cause the rotating part to be unbalanced.
3. The linkage part of the shaft system is misaligned, the center lines do not coincide, and the centering is incorrect. The cause of this failure is mainly caused by poor alignment and improper installation during the installation process.
4. The center line of the linkage part coincides in the cold state, but after running for a period of time, due to the deformation of the rotor fulcrum and foundation, the center line is destroyed again, thus generating vibration.
5. The gears and couplings connected to the motor are faulty, the gears are poorly engaged, the gear teeth are seriously worn, the wheels are poorly lubricated, the couplings are skewed and misaligned, the toothed gears are in the wrong shape, the tooth pitch is wrong, and the gap is too Large or severe wear will cause a certain amount of vibration.
6. The structural defects of the motor itself, the ellipse of the journal, the bending of the rotating shaft, the gap between the shaft and the bush are too large or too small, and the rigidity of the bearing seat, the foundation plate, a part of the foundation and the entire motor installation foundation is not enough.
7. Problems with installation, loose fixing between motor and foundation board, loose foot Bolts, loose bearing housing and foundation board, etc.
8. If the gap between the shaft and the bearing bush is too large or too small, it will not only cause vibration but also cause abnormal lubrication and temperature of the bearing bush.
9. The load conduction vibration dragged by the motor, such as the vibration of the fan and water pump dragged by the motor, causes the motor to vibrate.
10. Wrong connection of stator of AC motor, short circuit of winding rotor winding, short circuit between excitation windings of synchronous motor, incorrect connection of excitation coil of synchronous motor, broken rotor of squirrel cage asynchronous motor, deformation of rotor core caused by stator core and uneven rotor air gap, Causes air gap magnetic flux imbalance and causes vibration.
----- Responsible Editor: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
================================================== ================================================== ======
About thread rods is a bar that is threaded on both ends,and the thread may extend along the complete. normally it is long rod,
Like DIN975 own length with 1M.2M,3M,The standard is DIN975,DIN976 AND Us standards.but we also can produce non-standard ,it is according to drawings and Samples.
The grade in Germany standard:CL4.8,CL8.8
And in US standard/ASME B18.2.1 :CL2,CL5
We have ability to control the quality during production before sending to customers. We wish to do your best supplier of thread rods in China.
Thread Rods Purpose:
We are manufacture to supply our bolts to our customers,We Have responsibility to give our best goods with good quality . So we will track all step to customers at all times. such as: products requirement,Technology and property ,package,shipment ,and files ,and sales serve,
Welcome all of you to contact with us,we promise to give our the best We are improving as your supporting.
Thread Rods, Aluminum Threaded Rod, Acme Threaded Rods
Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com