The Roman rod is suitable for floor-to-ceiling curtains and is very stylish. The Roman rod refers to the crossbar of the curtain hanging. The cylinder of the shaft is about four centimeters in diameter. The length depends on the size of the window. The two ends of the rod are hoist-like stigmas. They are decorative and named after the style of ancient Roman architecture. Then, how to choose the Roman rod, how to install the Roman rod ? Then follow the decoration home network Xiaobian to learn about the relevant content!
First, the Roman pole shopping skills
1, the curtain rod wall thickness can prevent deformation: the general manufacturer in order to cut corners often use the materials on the hands and feet, the thinner the wall thickness of the pole, the smaller the bearing weight, the more likely to accidents during use. It is recommended that the designer ask the salesperson more when choosing, or remove the decorative head (commonly known as the flower head) by himself. The nature of the phenomenon is generally thicker and better.
2, hardware, technology, do not ignore: It is recommended that consumers buy their own decorative head (commonly known as flower head), observe its internal structure, generally speaking, the thicker the better. Choose a product that is strong and durable. Plastic products are prone to aging; wooden products are prone to erosive, cracking, long-term suspension, thicker curtain fabrics are easy to bend and feel heavy when pulling curtains: aluminum alloy products are single color, aluminum alloy abalone is long and easy Open rubber, poor load bearing performance and resistance to friction; iron products are easy to fall off if the surface is not properly treated in the later stage; only pure stainless steel products are really superior among many materials, but the price is high.
Second, how to install the Roman rod
1. Prepare. Check the matching of the Roman rod and its decorative head, the support, the lifting ring, the length of the Roman rod, and the width of the window.
2, scribing. With the mounted bracket as the standard line, the bearing positioning line and the hole position line are drawn. The three supports, the middle support is located in the center of the window or wall, and the ends must be equidistant. The support at both ends is about 15-20 cm from the wall or 5-10 cm from the end of the Roman rod.
3. Punch. The punching depth is 4-4.5cm. When punching, you can't run the eye or skew. Note: Keep away from wires and water pipes. After punching, knock the plastic expansion tube into the hole.
4. Mounting rod. The support is fastened by self-tapping; the lifting ring is inserted into the rod, the lifting ring is divided into two, and 1-2 rings are left at each end; the Roman rod is pressed into the opening support, and the decorative head is separated from the wall. The distance is the same.
5, hanging curtains. Put the hook on the curtain and put the other end of the hook into the hole of the ring; open and close the curtain to check whether the sliding is flexible and whether the two curtains are equal. Otherwise, fine tune.
The above is a detailed answer to the Xiaobian, I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting content, please continue to pay attention to our decoration encyclopedia!
More related wonderful reading:
How to install the curtain Roman rod? Curtain Roman rod installation points
How to install the Roman rod? How to choose a Roman rod?
An electric planer is a power tool with a rotating blade drum; it is designed for the chip-re-moving treatment of mainly wood or plastic surfaces. The electric planer is similar in design, handing and performance to the conventional and generally well knows manual planer. The high rotational speed of the universal motor is transmitted to the blade drum by an elastic belt drive.
Electric Planer,Electric Hand Planer,Electric Wood Planer,Electric Wall Planer
AWLOP CO.,LTD , https://www.awlop.com