White orchid is a very good flower. The white orchid is sunny and enjoys a warm and humid environment. How should white orchids be cured?
Flower pot, soil
Family potted white orchids should be cultivated in a soil that is loose, breathable and rich in humus. Usually, a well-ventilated tile basin, a purple sand basin (cylinder) or a plastic basin with a large bottom hole is used. It is better to have a certain amount of granular soil of different sizes in the soil in the basin to facilitate seepage and ventilation.
2. Planting and storage location
Every year from March to April, the pots and cylinders with white orchids are removed from the outdoors and placed in a sunny place. In summer, the temperature is high. The sunshade net or a simple shade can be used as appropriate, so that the white orchid can not only illuminate the morning sun, but also avoid the strong light of the summer afternoon (to avoid burning branches and leaves due to exposure). Whenever there is heavy rain or heavy summer rain in the autumn, the basin and the cylinder should be placed in the rain shelter in advance to avoid rotting roots due to excessive water accumulation. Winter should be placed in a room that is exposed to sunlight and has a good seal. In order to prevent frostbite, the pots and cylinders of white orchids should be wrapped in plastic film.
3. Trim
Potted white orchids should be selected to the appropriate height, and the top buds should be cut with the scissors and the side branches cut short. After the top buds are cut off to facilitate the long side branches, the long flower buds bloom more.
4. Prevention and control of pests and diseases
White orchids usually have varigosis, rot fungus, tsutsugamushi and the like. The occurrence of aphids can be directly captured and eliminated. For the pathogenic bacteria, the diluted carbendazim and metformin can be spray-sterilized by spraying.
5. Change the basin
According to the size of the crown of the white orchid and the length of the tree age, the basin and the tank of appropriate size should be replaced to facilitate the plant growth. When operating, wait for the pots to dry slightly, tilt the pots (cylinders) slowly (or turn them upside down), hold the pots in one hand, grasp the plants in one hand, and pour the white orchids into the new pots. In the new basin (cylinder), a small amount of loose soil should be placed in advance, and then water should be poured and planted stably.
6. Fertilization
In the vigorous period of white orchid growth (usually in May and June or July and August of each year), the white orchid should be applied once every half a month or a little nitrogen, phosphorus and potassium compound fertilizer should be applied at around 20 2 grams to 6 grams. The specific operation is as follows: first use a small shovel to draw a few vertical and horizontal small grooves in the basin, then slowly spread the fertilizer into the ditch, and then cover the soil in the basin, then pour some water. Let the fertilizer gradually penetrate into the root of the plant with each watering. Do not spread the fertilizer directly to the roots to avoid "burning roots" due to excessive soil fertility around the roots.
7. Watering
The proper watering is the key to maintaining good white orchids. White orchids should not be watered and overworked. The correct method of watering should be: once the soil in the basin is wetted, and the soil in the basin does not need to be watered when it is slightly dry. Remember not to water every day, but you can always spray water on the leaves with a small watering can. In summer, it should be immersed in water for not less than three or four times per month (plus water spray on the blades). The easier way to master it is to water the leaves as long as you see the leaves of the white orchids droop. In the fall, water is irrigated two or three times a month, and once or twice a month in the winter.
A Hammer Drill, also known as a percussion drill or impact drill, is a power Tool used chiefly for drilling in hard materials.It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provides a rapid succession of short hammer thrusts to pulverize the material to be bored, so as to provide quicker drilling with less effort. If a hammer drill's impact mechanism can be turned off, the tool can be used like a conventional drill to also perform tasks such as screw driving.
Impact Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.craftsbehappy.com