After a few years of living in a house, it will inevitably appear old. If you change your home, you may not have sufficient funds. Most people will choose to refurbish it. However, the renovation of old houses is not as simple as imagined. Apart from material selection, location changes, etc., attention needs to be paid. What other links are worth our attention? Xiao Bian gave brief you on how to save money and refurbishment existing home renovation precautions.
How to save money for renovation
The decoration of this kind of house is more complex and involves more aspects. Generally speaking, the cost of the whole process will be higher than that of the new house, unless the partial renovation is another matter. Let's talk about how to save money for refurbishment. First of all, the old floor can be removed without any change, and you can change it to replace it with a new one, depending on the condition of the old floor. Followed by the tiles, but also without shovel, directly on the old tiles on the new tiles, of course, not all cases can do so, if the original tile has a large empty area, then the old and new tiles are easy to fall off. Let's talk about the wall. If you think that the original white wall is too monotonous, then you can choose some good wall stickers or wallpapers to decorate and embellishment, eliminating the need for shovel walls. Finally, in the case of kitchen cabinets, long-term exposure to soot and water vapor will inevitably result in faded or sticky oils. It's better to change the door panels instead. Remind that if you plan to live in the elderly for a long time, then you need to carefully transform the original decoration, such as the floor, shower room, bathroom, kitchen, a little more investment.
Home renovation considerations
1, familiar with the decoration process
Before the start of construction, tenants need to provide detailed information on the areas to be reconstructed and the construction side, so this requires residents to understand the entire process. The order of refurbishment of general old houses should be first dismantled, then the walls of the pipelines should be well equipped, then the brick walls should be built, and wooden construction should be used. The pipelines hidden in the ceilings and wooden compartments should be well-matched before the landscaping can be done. Parts of the project that are easily soiled or destroyed are left at the end.
2, basic engineering and budget
Due to the complexity, it is necessary to know in advance the status quo and the carrying capacity of the house. Only in this way can the renewal planning be better. Due to the large number of projects, the budget for basic projects cannot be saved.
3, demolition of the wall and leakage
Since the house is very old, it is naturally old. Therefore, it is not recommended to knock too many walls, and it will also add a series of work and expenses such as ground and wall trimming and garbage disposal. In addition, the refurbishment of old houses still needs to thoroughly check for leaks. Once leaks are discovered, they must be prioritized and completely resolved.
4, the pattern can not be too large
Many families will make changes to the original pattern, but it is suggested that changes should not be too great, especially in such places as kitchens and kitchens, and if necessary, avoid changing positions. Because of the difficulty of construction, if the pipe is not handled well, it can easily cause leakage problems.
5, water and electricity lines for new
This part of the material can be renewed, because the next renovation does not know how many years later, if it is due to aging, there will be a problem soon, then open the trouble. Wires need to be pre-planned and hidden in order to be beautiful and safe, and to extend their service life.
6, the choice of wire specifications
There is a big difference between the current and the past, and a large number of electric appliances are used in the living room. Therefore, the size of the electric wire must be changed with the times so that it can meet the needs of use and be safe.
Summary: The above is Xiao Bian today as we bring refurbishment of knowledge, I believe that friends also have a certain understanding about the refurbishment save money tips and precautions you can take a look, you have to hope this article Help me.
Coated abrasives have a wide variety of applications, from grinding applications toLook, one class is the manual use of varieties (sheet emery cloth, sandpaper andPartially rolled sandpaper); The other is for mechanical processing varieties(mainly belt, disc, wheel and ring).
1, large flat surface polishing, steel plate, plywood, leather.
2, mass production of workpiece surface sanding, printed circuit board, steel
Piano board, wooden furniture, etc.
3. Continuous polishing and grinding of metal strip. (Strip width ok
Above 1200mm, length is unlimited)
4, forming grinding and polishing of complex surface work.
5, all kinds of diameter metal tube, rod, roller cylindrical grinding and large diameter
In 25mm container, internal circular grinding such as: cylinder, hydraulic cylinder oil tank
And so on.
6, the page wheel and sand ring can replace polishing cloth wheel, realize polishing process automation.
7. Sand plate is used for grinding welding seam of large shell, box body and hull
Burr, paint, etc.
Coated Abrasive,Flap Wheel,Sanding Paper,Sanding Belts
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com