FAG thrust bearing device

Source: China Bearing Network Time: 2013-12-28

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The cooperation between the thrust bearing and the shaft is usually a transitional cooperation; the cooperation between the race and the bearing housing hole is usually the cooperation of the gap, and the middle shaft of the two-way thrust bearing should be fixed on the shaft; to prevent the transformation of the thrust bearing relative to the shaft; Under normal conditions, the shaft rotation is mostly; therefore, the cooperation between the inner ring and the shaft is a win-win cooperation; the cooperation between the outer ring of the bearing and the bearing chamber is the cooperation of the gap.
When installing the thrust bearing; check the straightness of the axial line of the shaft ring and the shaft. The method is to fix the dial gauge to the end face of the casing; make the contact of the watch top on the bearing shaft raceway to change the bearing; Pointer; if the pointer is yaw; clarify that the middle line of the shaft and the shaft is not straight. When the box hole is deep; it can also be checked with the extended dial gauge. When the thrust bearing device is correct; the seat can actively get used to the roll of the roll. Ensure that the rolling body is located in the upper and lower ring raceways. If it is reversed; not only the bearing operation is not normal; and the cooperation faces will be severely worn. Because the shaft ring and the seat ring are not very significant; the device should be taken care of; Do not make mistakes. In addition, there should be a gap of 0. 20.5 mm between the seat of the thrust bearing and the hole of the bearing housing; to compensate for the inaccurate formation of the parts and the inaccurate formation of the device; In the middle offset; this gap can ensure its active adjustment; prevent collisions; make it work properly; otherwise; will cause severe damage to the bearing.

Recommend to friends comments close window

Bearing related knowledge

Common terms and definitions for rolling bearing equipment and sub-assemblies (below)
"Difficulties and Handling Tips" in Bearing Operation
10 good methods for distinguishing authentic FAG bearings can be used for normal operation of bearing bearing terminology; closely related to bearing alloy casting quality

This article links to http://
Please indicate the bearing network http://

Previous:Simplified diagnosis of SKF bearings:Next: Bearing disassembly

Electrostatic Spray Gun

An electrostatic spray gun is a type of device used for applying a coating, such as paint or powder, to a surface. It operates by charging the particles of the coating material with a negative or positive electric charge, which then attract to the opposite charge of the surface being coated. In this article, we will explore what electrostatic spray guns are, how they work, and why they are important.

What is an electrostatic spray gun?

An electrostatic spray gun is a tool used to apply a charged coating to a surface by utilizing the principles of electrostatics. By imparting a charge to the coating material as it is sprayed, the particles of the coating become attracted to the surface of the object being sprayed, creating an even, uniform coating.

How do electrostatic spray guns work?

Electrostatic spray guns operate based on the principles of electrostatics, which states that particles that have the same charge will repel each other, while particles with opposite charges will attract. The electrostatic spray gun charges the paint, powder or other coating material with a negative or positive charge as it exits the nozzle, creating a fine spray of charged particles. When these charged particles reach the surface being coated, they are naturally attracted to the opposite charge of the surface, creating an even and uniform coating.

Why are electrostatic spray guns important?

Electrostatic spray guns play a significant role in the coating industry, primarily due to the following reasons:

Increased efficiency: Electrostatic spray guns deliver a more efficient transfer of the coating material to the surface being applied, resulting in a reduction of overspray and waste.
Improved quality: The charged particles delivered by an electrostatic spray gun create an even and uniform coating, resulting in a higher quality and more professional finish.
Environmentally friendly: Electrostatic spray guns reduce the amount of coating material necessary for a project, resulting in reduced waste and environmental impact.

In summary, electrostatic spray guns are essential tools in the coating industry. They offer increased efficiency, improved quality, and environmental benefits compared to traditional spray methods. When used correctly and maintained regularly, electrostatic spray guns can provide a valuable tool for a range of coating applications.

Electrostatic Paint Sprayer,Electrostatic Paint Gun,Electrostatic Paint Sprayer For Sale,Electrostatic Spray Gun Price

Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.autoindust.com