The national standard of children's furniture has been implemented for more than one year.

The safety and toxic content of children's furniture has always been a concern of parents. The "General Technical Conditions for Children's Furniture" (hereinafter referred to as "the national standard"), which was implemented on August 1, 2012, stipulates that children's furniture products should not be dangerously sharp and sharp, and the edges and edges should be rounded or chamfered. . However, the quality spot check results issued by the General Administration of Quality Supervision, Inspection and Quarantine recently showed that nearly half of the products and the cutting-edge items of the products were not up to standard, and some products still had excessive formaldehyde emission. For this national standard that has been implemented for more than a year, the reporter interviewed 10 families randomly and found that no family could speak the regulations in the national standard.
13 batches of unqualified products are “made in Foshan”
A few days ago, the General Administration of Quality Supervision, Inspection and Quarantine issued the results of the quality supervision and inspection of children's furniture products in the fourth quarter of 2013. A total of 61 batches of children's furniture products, including cabinets, benches, tables, beds and other four products, including 33 cabinets, benches, tables, and beds, were produced from 61 enterprises in 7 provinces and municipalities. Batches of products do not meet the standards, and 13 of these are from Foshan.
From the results published by the AQSIQ, it can be found that among the 13 Foshan products that have problems, 12 batches of bedside tables are not up to standard on the edge and cutting-edge projects, and some products have not marked warning signs.
According to the reporter, children's furniture is designed for children aged 3 to 14 years, and the safety requirements are higher than ordinary furniture. The national standard implemented on August 1, 2012 has strict requirements on the sharp corners, gap size, stability and harmful substances of children's furniture, which can minimize the damage of children's furniture to children. At present, the AQSIQ has instructed the relevant provincial quality and technical supervision departments to deal with the unqualified products and enterprises in this spot check in accordance with relevant laws and regulations.
Consumers have limited understanding of the national standard. For this national standard that has been implemented for more than a year, the reporter interviewed 10 families randomly and found that no family can speak the regulations in the national standard.
Mr. Zhou told reporters that since the child learned to walk, he put a safety anti-collision corner on the corners of all the furniture in the house, so as not to touch the child. In the children's bed and toys, he only checks whether the corners are sharp, whether it meets the green standard of harmful substances, etc., for the safety sharpness of specific corners and the green residue data of harmful substances. I don't understand. Like Mr. Zhou, Ms. Zhang also failed to state the specific safety standards for children's furniture. When she bought furniture for her children, she mainly looked at whether the product had a qualified inspection label. Ms. Zhang said that it is difficult for ordinary consumers to remember standard data that is too difficult to understand. It can only hope that the quality inspection department will strictly control the quality of children's products, so that consumers have an authoritative reference when purchasing.
Le Cheng, the director of Red Star Meikailong Planning, told reporters that there are many children's furniture products on the market, and there are many inferior products that are mixed with fish. Consumers still have to go to regular shopping malls when purchasing children's furniture. The products purchased through this channel are more reliable. When purchasing, you should also ask the merchant for the inspection and acceptance label of the product. Only products that meet the national standards in all aspects can be used with confidence.

UC Series Bearing

Pillow blocks are advanced applied in places with simple equipment and spare parts, such as agricultural machines, convey system or construction machines. One unit of pillow block consists of deep groove ball bearings with spherical outer rings closed in double sides and a housing made by gray cast iron or punches steel.

A Pillow Block Bearing (Plummer block) is a mounted bearing used to provide support for a rotating shaft with the mounting surface on a parallel line with the axis of the shaft.

Pillow block bearings are generally self-lubricating.

Pillow block bearings are a form of mounted bearing used to provide load support for a rotating shaft axis. The bearing housing mounts to a surface parallel to the shaft axis. Selection of the appropriate bearings can be accomplished based on the shaft size and the radial and thrust load requirements. Pillow block bearings are designed to support a shaft: the mounting surface is on a parallel line with the axis of the shaft. Elongated bolt holes in the base or feet of the unit allow for some adjustment and easy mounting of the pillow block bearing.

Uc Series Bearing,Waterproof Insert Ball Bearing,Uc Series Pillow Block Bearings,Uc Series Mounted Ball Bearing

Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.lsjgbearing.com