In order to carry out extensive and in-depth "good furniture Chengdu" quality improvement actions, and effectively solve the problem of excessive levels of formaldehyde and other toxic and hazardous substances in furniture products and ensure consumer safety, in the first half of this year, Chengdu Quality and Technical Supervision Bureau on the city's wooden and soft furniture The product quality organization conducted a special supervision and spot check.
This time, a total of 406 batches of furniture products produced by 378 enterprises in the city were sampled. After inspection, the number of physical quality qualified was 374 batches. The pass rate of product inspection was 92.1%, which was 3.9 percentage points higher than the same period of last year. Among them: 323 batches of wood furniture were sampled, the pass rate was 90.7%; 83 batches of soft furniture were randomly selected, and the pass rate was 97.6%. A total of 30 batches of wood furniture and 2 batches of upholstered furniture products failed.
The main problem of unqualified wood furniture
Unqualified wood furniture products have 10 batches of formaldehyde emission unqualified. The primary reason for the unsatisfactory release of formaldehyde is the use of raw materials with high formaldehyde content, followed by the use of decorative materials without sealing or poor sealing. In addition, in order to reduce costs, individual companies use single veneers, thus causing formaldehyde to exceed the standard;
There are 1 batch of products with soluble heavy metals exceeding the standard. It is understood that soluble heavy metals are indicators that are detected in furniture products that have been painted with colored paint. In the process of contact with furniture, soluble heavy metals will migrate to the human body and gradually accumulate. When a certain amount is reached, the organs of the human body will be damaged. , symptoms of heavy metal poisoning. The reason for the disqualification is that the company is not strict with the quality of the incoming paint of the paint, which leads to the excessive weight of the raw material paint applied to the furniture;
There are 25 batches of products with unsatisfactory stability. The reporter learned that the product stability index is an assessment of the ability of furniture to resist dumping under the influence of external forces and involves safety. The main reasons for the disqualification: First, the design is unreasonable. Some enterprises only consider the appearance of the product in design, ignoring the size ratio. Second, in order to reduce the cost, the enterprise deliberately makes short pumping, and the main quality is concentrated in the front. , the phenomenon of heavy before and after;
There are also 3 batches of product drawer slides that are not qualified. The strength of the drawer slide is an important parameter for the durability of the furniture product. If the strength of the slide is unqualified, the drawer may be deformed or slipped during use, thereby causing injury to the user. The price difference of drawer slides with different quality is quite different. In order to reduce the production cost, individual companies use poor quality slide rails or install less screws during installation, which reduces the durability of the products and affects the function of the products.
The main problem of unqualified soft furniture
In the unqualified soft furniture, one batch of spring soft mattress formaldehyde emission was unqualified. The main reason is that the formaldehyde emission of the adhesive used in the adhesive felt is not up to the standard requirement;
In addition, there is a batch of sofa metal parts required to meet the requirements of the materials. The reason for the failure is that the company does not have enough understanding of the product standard learning, and does not control the wall thickness of the pipe as the force-receiving component, and uses a pipe with an unqualified wall thickness.
According to the results of this special supervision and sampling inspection, Chengdu Quality Supervision Bureau said: The quality of furniture products in our city is relatively stable. We will formulate effective and effective measures for the products that fail to pass the quality inspection and inspection; the formaldehyde emission and heavy metals exceed the standard. The enterprises will carry out investigations and handle them in accordance with the law.
Globe valve, is a linear motion valve and designed to stop, start and regulate flow control. Philic globe valves are well designed for very rigorous working conditions with Globe control Valve,WCB globe valve, Electric Globe valve, Pneumatic globe valves & gas-oil mechanism globe valves
Globe control Valve,WCB globe valve, Electric Globe valve, Pneumatic globe valves & gas-oil mechanism globe valves
Zhejiang Philic Fluid Control Co.,LTD , https://www.philicflow.com