What are the needs of industrial fans?

Source: Bearing network time: 2014-10-21

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Advances in operational reliability; add the normal operation time general industrial fans operate in harsh conditions; paper such as high temperature air contaminated and difficult to protect the environment which form bearing a specific operation difficult; may be incurred Various problems; then shorten the time of operation.
However, if the operating conditions are analyzed from the beginning; and the corresponding solutions are selected, the operational reliability can be greatly improved. Correspondingly, the cost of unplanned outages can be reduced and the overall economic benefits can be improved.
Extend the use of life number of fans is an important key components in industrial processes therefore; Persistent use of the number of bearing life is the key demand low operating temperatures, abundant smooth and pollution prevention is an important factor in extending the use of bearing life as an international number. A leading manufacturer of bearing solutions; SKF has a wide range of solutions and services; it is used to extend the life of the bearing; to improve the profitability of the application.
 function to carry out the direction of progress of industrial fans is moving progress function, free fall protection solutions and energy consumption. Bearings and associated components is an important factor in improving the fan function.
SKF uses its extensive common sense and experience to develop solutions for enhanced functionality.
Falling Noise and Oscillation Excessive oscillations and noise in the operation of large wind turbines and HVAC equipment; this problem is increasingly attracting the attention of the industry. Excessive oscillation levels can lead to premature failure of equipment; high cost of protection; It touches the unplanned stop and production loss. The high level of oscillation will also add energy consumption. The high noise level will cause the workers to be in a bad working environment.
Claims about smoothing agents More than one-third of premature bearing failures are caused by the use of incorrect smoothing agents and/or smoothing agents. Together, bearing orientations in industrial fans are generally difficult to reach. It has brought difficulties to the protection work. After using the recommended SKF smoothing agent, things and skills; can significantly reduce the stop time and protection needs.
In case the artificial protection is not feasible; the fully automatic smoothing system can be specified by SKF. Pick the SKF recommended smoothing agent; you can extend the bearing life limit to the maximum limit; then add the running time; lower the operating cost.
Low energy consumption Following the increase in power costs; falling energy consumption is becoming increasingly important. With regard to industrial fans and air handling units; there are several ways to cut energy consumption.
To save a lot of power; a simple method is to use the inverter to reduce the fan speed. However, this may have a negative impact on the bearing; therefore it is necessary to select the appropriate bearing.
It is also important to select the bearings and seals for the right application. Properly aligned belts and shafts are another key element. Fans that are not properly protected; and fans that are properly aligned with the shaft and belt; both Energy consumption can be up to 30%.
SKF offers a range of outstanding solutions and engineering services for reducing energy consumption.
Quickly and reliably complete the device and dismantle the mission The premature failure of the bearing is often caused by improper installation or alignment. Therefore, if it can be properly installed and disassembled, many of the most common causes of bearing failure can be prevented. If the bearing can get the correct device, it can lower the operating temperature, oscillation and noise level.

Recommend to friends comments close window

Bearing related knowledge

Xiangxin Bearing Related Terminology Spherical Roller Bearings Device Method Discrimination of Fan Bearing Skills: Can Tapered Roller Bearings Use Rolling Bearing Scale Plan Related Terminology and Definition

This article links to http://
Please indicate China Bearing Network http://

Previous: Common terms and definitions of bearings (5)
Next: SKF single row tapered roller bearing minimum load

Disinfectant Analyzer

The disinfectant analyzer includes a Universal Disinfectant Controller and the sensor. We provide chlorine, total chlorine, Chlorine dioxide, peracetic acid, hydrogen peroxide, ozone, bromine and other parameters. The principle used by these sensors is the membrane-covered method. The function of the disinfectant analyzer is to monitor the disinfectant content of the water quality in real time, and judge whether the disinfectant content of the water quality is up to standard, which is of great significance to industries such as drinking water, swimming pools, industrial wastewater, and medical wastewater. The sensors have long service life and do not need much maintenance. The disinfectant controller also has many functions, such as control function, data output function, historic recording functions. Our company has been focusing on water quality analysis for more than ten years, and our main products are related to water treatment. If you are interested in this kind of products, please contact us.

Disinfectant Analyzer,Free Chlorine Analyzer,Free Chlorine Analyser,Free Chlorine Sensor

Suzhou Delfino Environmental Technology Co., Ltd. , https://www.daruifuno.com