| Home>Bearing knowledge>How to maximize the life of the bearing |
How to maximize the life of the bearing
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Second; the correct storage; bearings should be kept in their original packaging before the device. The need to stay in a hygienic, moisture-free, relatively constant temperature environment. Rolling bearings should be away from dust, water and corrosive chemicals. Swing And sensation may permanently damage the mechanical properties of the bearing; therefore, sensation should be avoided during handling and storage.
Usually the bearings should be stored horizontally; some of the heavier bearings are placed vertically after being placed vertically; they will be deformed by their own weight!
Also; greased (or sealed) bearings need to be uniquely guarded; because the grease will change its density after long-term storage. When the bearing is used for the first time; there will be a certain degree of conversion noise. Therefore; Placement should be controlled according to the first-in, first-out criteria!
3. Sanitary; this is very important for rolling bearings. The transition surface of the bearing ring is very smooth; the damage caused by the formation of pollutants is very sensitive. The particulate impurities will be over-molded by the rolling elements and some pressure will occur in the bearing; Permanent information is exhausted.
Fourth; all equipped with re-equipment; bearings should be carefully installed and disassembled with appropriate things (can refer to the bearing disassembly series video). Should choose the right thing! Professional professors estimate; bearings fail prematurely; 16% are due to incorrect devices. Usually many devices are used; usually suitable bearing device equipment is adopted.
But in the protection or exchange work; the environment is diverse! Advocate us; relevant drawings; protection manual; product manuals need to be carefully looked at. Bearing components should also adhere to affirmative hygiene!
5. Careful installation and disassembly; the bearing device has been talked about repeatedly in the past (we have similar problems; there are some articles on bearing devices); once again, briefly summarize:
1; Do not apply device force on the roll element; this is very simple to cause partial overload of the roll element and the touch surface of the race; then the premature failure of the guide bearing.
2; Do not use any hard things (such as hammers; screwdrivers; etc.; I have seen too many "hard" devices with these two things; too strong) directly knock on the bearing appearance; this will cause the bearing ring to crack or break.
3; usually the bearing will not be removed from the equipment; as long as the larger bearing will be removed due to preventive protection. During the disassembly process; the first thing should be the correct thing; to ensure that the adjacent parts are not damaged!
Six; correct and appropriate smooth; smoothing agent can block the bearing appearance; then reduce the conflict; protect metal parts and avoid pollution and impurities. There are a variety of smooth grease for different operating conditions.
Recommend to friends comments close window
| Bearing related knowledge |
| Pump bearing protection Correct protection of FAG bearings in the purification chamber of diesel engine Analysis of the device skills of NSK bearings NTN bearing layout and features |
This article links to http://
Please indicate China Bearing Network http://
Previous:The bearing professor teaches you the smooth protection bearing. The next part: The effect of smooth grease on the life of KOYO bearing
PVC High Speed Door are designed for indoor use and ensure rapid handling operations between different areas that should remain separated. These safe and efficient industrial doors are made of a shaped steel frame and covered with PVC. These high speed doors are safe and efficient and consist of a shaped steel frame covered with PVC. Safety is ensured by their photocells and barriers.
High speed doors protect us from harm, save energy and help us to separate processes for optimal productivity. A high speed door's most important job is to simply open and close quickly and safely every time you need it.
The high speed pvc roll shutter door require high strains, caused by the high operating speed and the frequency of openings, have to be taken into account during construction. In the same way, basic conditions like size and installation location add up to considerable requirements regarding safety and control technique.
PVC High Speed Door,Large PVC High Speed Door,Transparent High Speed Door,Great Performance High Speed Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com