ã€China Aluminum Industry Network】 1. Fusion casting is the first process of aluminum production:
(1) Ingredients: According to the specific winning prizes required for production, the amount of various alloy components added is calculated and properly matched with various raw materials.
(2) Smelting: The prepared raw materials are added into the smelting furnace according to the process requirements to be melted, and the impurities and gases in the melt are effectively removed through degassing and deslagging refining means.
(3) Casting: The smelted aluminum liquid is cooled and cast into a variety of round cast rods under a certain casting process condition through a deep well casting system.
2. Extrusion: Extrusion is a means of forming a profile. First, molds were designed and manufactured according to the profiles of the profile products, and the heated aluminum casting bars were extruded from the mold using an industrial aluminum profile aluminum extrusion press. Commonly used grade 6063 alloy, when used in the extrusion also uses an air-cooled quenching process and artificial aging process to complete the heat treatment. Different brands of heat treatable alloys have different heat treatment regimes.
3, coloring (here first talk about the oxidation process)
Oxidation: Extrusion of aluminum alloy profiles, the surface corrosion resistance is not strong, must be surface treatment by anodizing to increase the aluminum corrosion resistance, wear resistance and appearance of the appearance.
Its main process is:
(1) Surface pretreatment: The surface of the profile is chemically or physically cleaned to expose a pure matrix to facilitate obtaining a complete, dense artificial oxide film. It is also possible to obtain a specular or matt (matte) surface by mechanical means.
(2) Anodizing: After surface pretreatment of the profiles, anodization occurs on the surface of the substrate under certain process conditions to form a dense, porous, strong AL203 film layer.
(3) Sealing: The pores of the pores of the porous oxide film formed after the anodization are closed, so that the oxide film is prevented from contamination, corrosion and abrasion resistance. The oxide film is colorless and transparent. By using the strong adsorption of the oxide film before sealing, some metal salts can be adsorbed and deposited in the film pores, which can make the appearance of the material besides the colors (silver white), such as: black, bronze, Gold and stainless steel and so on.
Customized Glass Reactor System
Customized Glass Reactor System means we can make lab chemical Single Layer Glass Reactor with heating mantle , glass reactor with heating water oil bath , glass reactor with condenser cooling coil, glass reactor with stirring paddle or stirring shaft , customized glass reactor distillation flask
Custom,Custom Experimenter,Custom Glass Reactor,Customized Chemical Reactor
Zhongyi Kori(Zhengzhou)Equipment Co.,Ltd , https://www.korireactor.com