To warm the floor to meet the following three major requirements:
A, thermal conductivity and heat dissipation - thin and thick should not be thick Tips: wood and bamboo are very good natural materials, ground heat passed to the surface through the floor, there will inevitably be heat loss, the ideal floor can minimize these losses . Therefore, in order to reduce the loss of thermal energy and reduce the heating operation and maintenance expenses, the floor heating floor must be "thickness is not selected thick." Optional multi-layer solid wood, bamboo flooring and laminate flooring, the thickness of not more than 8 mm, the maximum can not exceed 10 mm.
B, high dimensional stability --- small should not be large Tips: the use of geothermal floor environment is quite complex, non-seasonal season ground to withstand all kinds of moisture, and heating the ground temperature suddenly rose, the wooden floor must withstand "temperature" Dual changes in "humidity". Therefore, geothermal flooring must be purchased with good stability, such as laminate flooring, multi-layer solid wood flooring, bamboo flooring, these integrated composite flooring.
C, moisture resistance and heat resistance is better --- suitable for environmental protection Tips: Integrated composite flooring adhesives, adhesives need to comply with environmental protection, bonding strength, high temperature and humidity resistance of the three major indicators. In particular, for geothermal floors, it is necessary to go through experiments such as high humidity resistance and low temperature resistance. If ordinary adhesives are used, environmental indicators, moisture resistance, aging resistance, and expansion rate cannot meet the standards. Therefore, when a consumer purchases, it is necessary to check the product report and inspection report of the merchant.
What kind of floor is suitable for floor heating?
May look at these general standards, some readers still do not know what kind of product should be selected. There are many kinds of floorboards on the market today, including solid wood flooring, laminate flooring, and bamboo flooring. The following is a comparison of the characteristics of various floors.
Composite floor
In general, laminate flooring is more suitable for use as a geothermal floor. Because the standard thickness of the geothermal floor is 6.5-8.5mm, the thickness of the composite floor is mostly 6-9mm, in which the reinforced laminate flooring is mostly 6-8mm, the three-layer parquet is 8-9mm, the heat transfer performance is better, and its The surface has a wear layer of aluminum oxide, which is conducive to the rapid diffusion of heat at the surface.
In addition, the laminate flooring is pressed at high temperatures and the internal moisture content is very low, so the floor will not be deformed due to moisture loss. Each layer of multi-layer solid wood flooring is intertwined horizontally and horizontally, restraining each other, and there is also a dense anti-deformation groove on the back surface, which decomposes the stress generated on the heated surface, so the deformation is very small. This is one of the reasons that laminate flooring is suitable for geothermal floors.
In the laminate flooring, the effect of the lock-type floor is better than that of other products. Because there is a small gap between the hooks and the floor, even if the floor is exposed to heat and moisture, it will not be easy to go out after expansion.
wooden floor
In comparison, the thickness of solid wood flooring is generally about 2cm. When installing it, the keel must be used. If it is used as a geothermal floor, there is air between the floor and the ground. The thermal conductivity coefficients of air and wood are very low, so that heat is not easily transmitted to Surface, it will lead to waste of heat, surface temperature is uneven, the temperature difference feels obvious. And the solid wood floor has high water content, and it is easy to crack and deform under the condition of high temperature and high temperature heating for a long time.
If you must use ordinary solid wood flooring, you should try to use the back of the film layer floor, because it can prevent moisture and moisture, and can maintain the wood moisture content and the ambient humidity balance.
Bamboo flooring
The bamboo flooring is delicate in texture, good in toughness, shrinks and swells less than solid wood flooring, and is more comfortable to use. It is warm in winter and cool in summer. However, the color and texture of the bamboo flooring are too single, so only a small part of the households that use floor heating receive it. In the heat and moisture resistance of bamboo flooring is also relatively lacking, in the south, bamboo flooring will be long locusts, affecting the life of bamboo flooring.
Laminate flooring
Laminate flooring is also a good place to warm the floor, but it adds more glue during production. When heating, the chemical substances in the glue are easier to release and affect the health of the family.
Comparing so many floors, I believe we have a deeper understanding of what floor to choose to warm. If you want to warm the floor in your home, when you choose the floor, you can learn to compare the above introduction and choose!
Tips: If you want to know more about the activities of related products, please click to view: http://mall.jia.com/shanghai/list/100204/
Building materials knowledge decoration materials knowledge warm heating
Round Ductile Manhole Cover is made of ductile; mainly both the cover and frame is in round condition, we make the manhole cover on BS EN124, Mainly our products are A15, B125, C250 and D400, sometimes also make it E600 and F900 in case of need. For A15, B125, C250 and D400 ductile manhole covers to be used in Green belt, Pavement, Auxiliary road, Main road and Express way. We make ductile manhole covers all by producing line, the quality is very good, and we warmly welcome customers all over the world to do business with us.
Ductile round manhole covers, Ductile round manhole covers D400, Ductile round manhole covers opening 600.
Zhoushan Runchun Import & Export Co., Ltd. , https://www.en124casting.com