FAG bearing inner ring fixing method

Source: Bearing network time: 2013-11-04

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

FAG bearings have inner and outer rings; I think we all know this. As an international FAG bearing, what is the fixing method? Today we will first analyze the fixing method of the inner ring of FAG bearing.
FAG bearing shoulder fixed FAG bearing inner ring depends on the shoulder and interference to complete the axial fixed.
Applicable to the fixed support layout of the two ends. The layout is simple, the outer dimensions are small. The circlip of the FAG bearing is fixed. The inner ring of the FAG bearing is axially fixed by the shoulder and the lock nut. It can accept a small two-way axial load.
Axial layout scale small FAG bearing lock nut fixed FAG bearing inner ring is axially fixed by the shoulder and lock nut. It has a locking Washer to prevent looseness; safe and reliable; suitable for high speed, heavy load occasions.
The end face thrust washer of the FAG bearing is fixed. The inner ring of the FAG bearing is axially fixed by the shoulder and the shaft end retaining ring. The shaft end retaining ring is fixed to the shaft end by Screws. The fixing screw should have anti-loose equipment.
Applicable to the occasion where the shaft end is not suitable for cutting thread or space is limited. The fixing sleeve of FAG bearing is clamped on the shaft according to the radial dimension of the inner hole of the adapter sleeve; to complete the axial fixing of the inner ring of the bearing The lifting method of the unloading sleeve is the same as that of the adapter sleeve. However, the withdrawal sleeve has a special nut; the bearing is convenient to load and unload; it is suitable for double row spherical bearings with large radial load and small axial load. Fixed on the optical axis.

Recommend to friends comments close window

Bearing related knowledge

The NTN imported bearing shows the reason for inserting the spiral trace. The type, characteristics and use of the tapered bearing are the concept and the use of the bearing base. The bearing noun is in Chinese and English. "TIMKEN imported bearing protection protection"

This article links to http://
Please indicate China Bearing Network http://

Previous: Skill Analysis: Smooth Principle of Split-Slide Bearings Next: The Advantages of Oil and Grease for Rolling Bearings

Pins

Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing.

Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.

Metal Pins,Stainless Steel Pins,Flange Alignment Pin,Safety Coupler Pin

Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com