| Home>Bearing knowledge>The key to pay attention to force when bearing assembly and disassembly |
The key to stress when bearing assembly and disassembly
Source: Bearing network time: 2013-09-13
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
(2) The drag force should continue to the extent it should be; for example, when the bearing is mounted, the force should be stopped when the bearing is just in the correct orientation; ensure that the end face of the ferrule (gasket) abuts against the shoulder hole of the seat hole or the shaft; Can't be squeezed too tightly;
(3) Prevent the force from being applied through the rolling body; this requires the inner ring to apply force when the inner ring (shaft ring) is assembled and disassembled; the outer ring is applied when the outer ring is assembled and removed.
(4) The size of the force should be smooth and uniform; it is not suitable for impact; this requires the use of oil pressure or something that can apply a smooth tension or pressure; the real has to use hammering; also through the copper sleeve and other soft Do not use the metal to cushion; the tapping force can be light. The best use of copper rods or copper hammers for hammering.
Recommend to friends comments close window
| Bearing related knowledge |
| Bearing ferrule grinding super processing new skills and development (3) Correct use of "TIMKEN cylindrical roller bearing smooth grease" method of bearing ring cracks caused by inch tapered roller bearings 29685/20 Disassemble the vibrating screen bearing correctly operating method |
This article links to http://
Please indicate China Bearing Network http://
Previous:Gap smooth bearing series Next: Supporting bearing skills of single sheet main roller
Pull Out Faucet,Pull Out Sink Faucet,Hot Cold Pull Out Tap,Brass Pull Out Kitchen Faucet
Jiangmen Faer Sanitary Co.,Ltd , https://www.faersanitarys.com