Everyone knows that one thing is to do enough preparation before doing anything, so that the work can be successfully completed. Then the operation of the spraying equipment follows this principle. The quality of the preparation work directly affects the quality of the spray. Next, let's take a look at some of the six preparations before spraying equipment:
1. The capacity of air compressors provided by users shall comply with the air consumption of the aircraft specified in the instructions, and shall be greater than the consumption as much as possible.
Second, the outlet pipe and the intake pipe mouth should meet the requirements in the specification, in order to maintain adequate air intake.
Third, the compressed air from the air pressure is filtered and then enters the spray equipment, which is conducive to extending the service life of the pneumatic system.
Fourth, in order to reduce the possibility of compressor pollution, the air compressor should be as far away from the spraying scene as possible.
Fifth, the paint of the sprayer should be filtered first. The filter should be selected according to the viscosity and particle size of the paint. The filter is too fine for the paint to pass through. If it is too thick, the spray gun can be easily blocked.
6. Avoid static sparks. All airless spraying equipment should be well grounded.
Once the paint equipment has been selected, it cannot be changed, so the preliminary work of the paint sprayer is very important. More about the characteristics of automatic paint sprayer, you can log Qin Cheng Machinery Equipment Factory, reproduced indicate
0.90ml/rev Gear Pump,Pump With Hermetically Sealed Leak Free,Paints and Inks delivery pump,CIJ inkjet printer pump,pulseless delivery pump
Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com