"Heart is Ya'an, pray for Ya'an" Here, all employees of Wanhua Machinery Co., Ltd. all of them gave a deep silence to the compatriots killed in the earthquake-stricken area in Ya'an, Sichuan. May the deceased rest on the strong. Wanhua Machinery Construction Waste Crusher is a crusher specially designed for brick factories. Its main purpose is to reuse waste materials such as waste construction materials. It is also the realization of the national environmental protection policy turning waste into treasure. The manufacturer Wanhua Machinery tells about this construction waste crusher. The construction waste crusher can mainly use garbage brick, cement block, broken brick, waste brick, lime block coal gangue and shale. The wet materials are pulverized and reused, so that the waste can be reused, the utilization rate of raw materials is increased, the cost is reduced, and the profit is increased. These are the main uses of the construction waste pulverizer. One of the indispensable equipments for the country’s economic development is the construction waste shredder.
[The advantages and features of Wanhua Construction Waste Crusher:]
First, the rotor is crushed in two stages. [Two sets of rotors connected in series, so that the material crushed by the upper rotor is immediately shredded again by the hammer of the lower-stage rotor that rotates at a high speed, and the materials in the cavity collide with each other at high speed, and pulverize each other to achieve the effect of hammer powder and material powder. , direct discharge. ]
Second, there is no screen bottom, high humidity materials, never blocked. [The traditional pulverizer with enamel sieve plate is not suitable for raw materials with a moisture content higher than 8%. When the moisture content of the raw material is higher than 10%, it is prone to severe blockage, so that the hammer can not be rotated, the material can not be discharged, and even Burning out the motor, seriously affecting production]
Third, the wear-resistant combination hammer. [High alloy wear hammer. The hammer hammer handle is used in combination, only the hammer head is replaced, and the hammer handle is not changed. ]
Fourth, the unique shifting gap technology. [The hammer does not need to be repaired after being worn, and the moving position is used repeatedly. A pair of hammers can be used with three hammers. ]
Five, hydraulic electric starter casing. [It only needs one person to open and close easily, not only light and fast, but also safe and reliable, and easy to repair. ]
The construction waste pulverizer uses a sieveless bottom to smash construction waste without blocking the smashing principle. Note: can also be customized according to customer needs
Our company's main production equipment: organic fertilizer crusher Cinder crusher network: http://
Company Name: Gongyi City Wanhua Machinery Trading Co., Ltd. Mobile: 15890034561
Phone: 0371-64127058
20V Cordless Reciprocating Saw
The Cordless Reciprocating Saw is convenient to use at anywhere, wireless power supply, Battery is rechargeable, and can be used with different Brand Battery Platform.
The 20V Cordless Reciprocating Saw Saber Saw is used to cut tree and metal tube, with cutting capacity: 100mm for wood and 8mm for soft steel.
The Cordless Saber Saw is also can be used to cut meat with Stainless Steel Blade.
The Cordless Reciprocating Saw is convenient to use at anywhere, wireless power supply, 2Ah and 4Ah Battery is rechargeable.
The Cordless Reciprocating Saw Vibration is small when cutting the wood, work with 0-2900 rpm speed, 28mm stroke length.
The Cordless Tree Cutting Power Tool with a aluminum gear box, not plastic one, for better product performance.
The Cordless Reciprocating Saw with Quick Release Chuck, for easy blade change.
BTW, the pivoting shoe is adjustable.
Cordless Reciprocating Saws,Small Cordless Reciprocating Saws,Power Reciprocating Saws,Reciprocating Saw with battery and Charger
Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com