The first step: first close the door, determine the center line of the door and the door frame, and then align the sticker in the electric lock box with the center point.
Step 2: Open the hole in the door frame by pressing the hole shown on the sticker.
Step 3: Install the lock body on the door frame, place the baffle on it, and fix it with screws.
Four steps: install the lock on the door
Note: 1. The position of the lock tongue and the lock should be aligned, and the installation should be proper and firm. Improper installation can cause the lock tongue to be out of position and the lock body to heat up, and the life of the lock will be drastically reduced.
2. The delay of the lock can be adjusted to 2.5 seconds. When the door is closed, it will not be shaken and then locked.
ATEX Approved Coriolis Mass Flow Meter
Sealand is a trustworthy manufacturer of Mass Flow Meter Coriolis, Mass Flowmeter Coriolis, Flow Meter Coriolis and Meter Coriolis, ATEX, CE & IECEx approved.
The flow meter model covers from DN03 to DN150, and bigger models are being developed. Main specification is as follows.
Model No.
Diameter
(mm)
Max. flow rate
(kg/min)
MWP.
(MPa)
Accuracy grade
(%)
Zero stability
(kg/h)
CG-03
03
6
4
0.1/ 0.2/ 0.5
0.012
CG-06
06
18
4
0.1/ 0.2/ 0.5
0.04
CG-15
15
50
25
0.1/ 0.2/ 0.5
0.12
CNG-20
20
120
25
0.1/ 0.2/ 0.5
0.36
CG-25
25
200
4
0.1/ 0.2/ 0.5
0.62
CG-40
40
500
4
0.1/ 0.2/ 0.5
1.60
CG-50
50
1000
4
0.1/ 0.2/ 0.5
2.38
CG-80
80
3000
4
0.1/ 0.2/ 0.5
7.05
CG-100
100
3600
4
0.1/ 0.2/ 0.5
12.00
CG-150
150
8000
4
0.1/ 0.2/ 0.5
50.00
Mass Flow Meter Coriolis, Mass Flowmeter Coriolis, Flow Meter Coriolis, Meter Coriolis
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com