The origin and development of the ceiling

Ceiling, Chinese medicine noun, body part name. The common name of the captain. Because it looks like a ceiling, hence the name. Ceiling, English name: Ceiling, is the place on the top surface of a building. In the interior design, the ceiling can be used to paint, paint and beautify the indoor environment, and install chandeliers, light pipes, ceiling fans, skylights, and air conditioners to change the effect of indoor lighting and air circulation.

The ceiling is a general term for decorative interior roofing materials. In the past, traditional houses were mostly made up of straw mats, banquets, and wooden boards. With the advancement of technology, more modern building materials have been applied.

The magical effect of the ceiling in modern decoration: the surface of the ceiling is treated with special technology, anti-static, no dust, no dust, and can fully meet the requirements of high-purity, high-purity, high-purity electronics workshops, hospital operating rooms, biological laboratories, etc.

In the past, people's impression of the ceiling was only on the "cement of white flowers and flowers". It is not known that the ceiling occupies an extremely important position in the home decoration. In addition, the ceiling decoration also needs to cover the beam, column, pipeline, heat insulation, sound insulation and so on. In addition, the design of the ceiling is wonderful and varied, each of which can create different decorative effects. When you are renovating your new home, you may wish to change your room ceiling.

The ceiling is now mainly used in airports, stations, office buildings, shopping malls, subway stations and residential buildings. There are gypsum board, mineral wool board, PVC, aluminum gusset and soft ceiling on the market.

The development of the ceiling: the first generation of products are gypsum board, mineral wool board; the second generation is PVC; the third generation is metal ceiling.

Classification of aluminum ceilings: aluminum veneer ceiling, aluminum honeycomb ceiling, standard square ceiling, hanging ceiling, C-shaped buckle ceiling, U-shaped buckle combination ceiling, D-shaped buckle ceiling, aluminum strip ceiling, round tube Strip ceiling, square tube ceiling, punching ceiling, etc.

Gypsum board and mineral wool board are also being improved continuously, with waterproof gypsum board and sound-absorbing mineral wool board. However, they have a single plate type and are not easy to scrub. They are installed for the open frame keel and are used for engineering. PVC products are poor in oxidation resistance, non-moisture-proof, non-fireproof, easy to deform, and discolored. They are mostly used in old-fashioned home improvement. With the improvement of people's quality requirements for decoration, nowadays home decoration has basically used aluminum gussets to make ceilings.

Third-generation metal ceiling; 1. Smooth and flawless roller-coated plate is a kind of high-quality aluminum-magnesium alloy plate as the substrate. After the surface of the aluminum plate is strictly degreased and chemically treated, the imported PVDF fluorocarbon coating is rolled and dried. Composite material. 2. The rapid development of the roll-coated board is mainly due to the fact that the conventional spray coating is continuously coated, dried by a roll coating process, and the ordinary dip coating chemical treatment method is distinguished. It not only effectively controls the coating quality, but also eliminates defects such as edge defects that are easily generated by painting. At the same time, it can also be operated with no Ming treatment liquid to reduce environmental pollution and meet the environmental protection requirements of developed countries. 3. The color of the painted ceiling is bright, which has the strength and excellent flexibility of the aluminum plate, and has good corrosion resistance and weather resistance of the paint film. It can withstand deformation under high wind pressure and can be cut, slit, stamped, slotted, drilled, curved and compressed. It can completely replace similar imported products. Therefore, it is widely used in the construction industry: industrial plants, office buildings, shopping malls, stations, subways, airport buildings, modern large hangars, large stadiums, large clubs, and so on. With the development of the times, the field of home decoration has also entered the mainstream of the decoration industry.

PDC shoes for Floor grinding

BOHONG also manufactures PDC dome, conical and chisel cutters. These can be used as impact arrestors for PDC Drill Bits.As cutting structures for roller cone drill bits and down hole hammer/percussion bits, and as gage protection for all drill bits and other downhole tools such as stabilizers, reamers, hole-openers, etc.


Diamond Grinding shoes double bar trapezoidal tool - two abrasive segments are evenly embedded in the metal through a fine manufacturing process.It has strong scraping ability , high durability and long service life.

-Metal substrate can meet dry/wet applications.

-Commonly used for floor grinding.

Metal Bond Trapezoidal Diamond Grinding Shoe Oval - Provides great grinding power. Two oval shaped abrasives are uniform in texture, increasing tool life and performance.

-Allows for special scraping needs and increased durability.

Applications:

Applications include a variety of high, medium and low cables, steel cord , medical wire, superconducting wire , stranding and spring wire. Using different types of dies for the same type of wire can show different results in terms of die wear and usage time.

BOHONG offers a customized consultation service to provide customers with the most suitable Wire Drawing dies with guaranteed work efficiency.






Polycrystalline Diamond Pdc Cutter,Polycrystalline Diamond Compos,Pdc Shoes For Grinding Floor,Grinding Plates For Concrete Grinding

Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com

Posted on