ã€China Aluminum Network】 All people who do extrusion of aluminum profiles know that it is not worthwhile to scrap the profiles in the case of bending. It should not happen, and it can be avoided! So, how to reduce or avoid scrapping it!
Extrusion and straightening: straightening is a very serious link caused by the profile, the straightening work must pay attention to the intensity of straightening. If the strength is too great, the profile may be deformed, closed, orange peel, etc., and the strength is too small. The resulting profile is not straightened, causing bending.
Squeeze frame: this is also very important, after sawing out the length of the length, it is necessary to carry out the frame, this fashion framer must pay attention to: This material is an oversized or small material, with a pipe or a flat mold pull Out of the material? In general, the material and the tube are not easily bent at both ends of the frame. However, when the material is pulled out from the small material and the planar mold, the two ends can easily be bent. At this time, it should be from the two ends to the middle. Move closer to frame the material. However, even if some profiles do not work, such as louvers, windows, lids, etc., they must be placed on time-efficient profiles and lifted into frames.
Surface treatment: the billet is aged, the hardness has reached the standard, the profile is not so easily bent, but when the shelf is still to be noted, when the two ends of the material, try to avoid strong fluctuations from top to bottom, vigorous fluctuations will also cause certain aging profiles The bend.
HOLLY customized thickness self-adhesive Rubber Foam Sheet is an environmental protection insulation material with closed cell structure. We produce rubber-plsatic Foamed Heat Preservation Products(PVC/NBR)by introducing newest technology and craft and automatic processing line.Nitrile butadiene rubber (NBR) is a family of unsaturated copolymers of 2-propenenitrile and various butadiene monomers (1,2-butadiene and 1,3-butadiene). It is manufactured without the use of CFC'S, HFC'S OR HCFC'S. It is also formaldehyde free, low VOCS, fiber free, dust free and resistant to mold and mildew.
Self-Adhesive Rubber Foam,Self Adhesive Thermal Insulation Foam,Self Adhesive Natural Insulation Foam,Self-Adhesive Natural Rubber Foam
Wuxi Holly International Trading Co., Ltd , https://www.hollynbrs.com