RTV Silicone Rubber for Moulding

RTV Silicone Rubber for Moulding

RTV Silicone Rubber for Moulding are used for mold duplication and delicate mold making for poly crafts, resin crafts lighting and candle crafts

Features of RTV Silicone Rubber for Moulding:

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5) Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 200KG

The operating method of RTV Silicone Rubber for Moulding

1. Deal with the original mould.

2. Spray release agent evenly on the original mould

3. Weigh the silicone rubber and curing agent correctly and mix them evenly

4. Deairring and air bubble eliminating handling

5. Perfusion or brushing process

The mixing ratio and reactions of the curing agent RTV Silicone Rubberare listed as follows:

1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.

3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.

4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.

(Note: The amount of the curing agent should not exceed 5 %, otherwise the curing time is too fast and the mold can not be used normally, thus, the silicone rubber is wasted. )

All the information just for reference, any questions, just feel free to contact us, thank you in advance. RTV Silicone Rubber for Moulding

RTV Silicone Rubber for Moulding are used for mold duplication and delicate mold making for poly crafts, resin crafts lighting and candle crafts

Features of RTV Silicone Rubber for Moulding:

(1) Silicon rubber for pad printing with SGS and ROSH approval

(2) Curing agent arrange together as free charged

(3) In liquid form and in various colors

(4) With an exceptional fluidity and good operability.

(5) Temperature and deformation resistance as well as low shrinkage.

(6) High duplication times.

(7) Sample orders are available

(8) MOQ: 200KG

The operating method of RTV Silicone Rubber for Moulding

1. Deal with the original mould.

2. Spray release agent evenly on the original mould

3. Weigh the silicone rubber and curing agent correctly and mix them evenly

4. Deairring and air bubble eliminating handling

5. Perfusion or brushing process

The mixing ratio and reactions of the curing agent RTV Silicone Rubberare listed as follows:

1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.

2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.

3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours.

4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded after 1 -1.5 hours.

(Note: The amount of the curing agent should not exceed 5 %, otherwise the curing time is too fast and the mold can not be used normally, thus, the silicone rubber is wasted. )

All the information just for reference, any questions, just feel free to contact us, thank you in advance.

Universal Expansion Joint

Universal Expansion Joint,Stainless Steel Flexible Expansion Joint,Anti-Vibration Expansion Joint,Round Expansion Joint

Hangzhou Ehase-Flex Co.,Ltd. , https://www.ehasetech.com