Cork is a kind of superficial skin developed species conservation organizations, have renewable characteristics, its application is more extensive, like red wine cork, cork flooring, etc., in particular, are more applications on the floor, doing that cork Is the floor easy to use? Check out the practicality of the cork floor.
1. Is it easy to use cork flooring?
a. Advantages
Feeling is soft and comfortable: The flooring experience made of cork is very good, very soft, comfortable, and has anti-fatigue health characteristics. It is suitable for the decoration of elderly people and children in the home. The resilience of cork can reduce the back of the human body. The pressure caused by the legs, ankles and the like, which protects the knees of the elderly, also has a buffering effect on falls.
Anti-skid performance: Cork flooring and other materials compared to the floor, it's anti-skid is very good, is also very suitable for decoration in the home where the elderly and children, so walking is not easy to fall, increase security.
Able to absorb noise: Cork flooring sounds very good, it is a well-known silent floor in the industry, as long as it is because of its soft texture and polyhedron's special structure, filled with air in honeycomb holes, walking on the top almost There is no sound.
b, shortcomings
Wear and compression resistance is poor: Although the anti-slip and elasticity of cork flooring are good, but not wearable or pressure, not suitable for a long time under heavy pressure, or it can not rebound, especially stilettos stepped on On a cork floor, its indentation is almost impossible to restore. It is best to wear soft floor slippers to walk on cork floors. It is also necessary to prevent sand from being carried into the room and to lay a squat mat at the entrance.
Cleaning is not easy: there are advantages in the special structure of cork , but also there is a bad place, honeycomb hole is very easy to accumulate dust, it is also difficult to clean and clean, usually use it is also the right way, clean and care Be more careful.
Not waterproof: Cork flooring is less water resistant than ordinary flooring. It is also because of its special structure that causes moisture to infiltrate more easily. It is also necessary to prevent ink, lipstick, etc. from getting on the floor.
2. Introduction of practicality of cork flooring
Cork flooring is mainly composed of two kinds of paste-type cork flooring and lock-type cork flooring. They use different colors of different tree species to make different patterns, so that they can be applied to some floor logos, especially on some international courses. It is very common.
Cork flooring has the advantages of softness, quietness, comfort, wear resistance and other advantages, which means that it is suitable for use in meeting rooms, bedrooms, recording studios, libraries and other places.
Edit Summary: The above is done on cork flooring and cork flooring easy to do practical introduction, cork flooring has a great advantage, its application is very powerful, but in use may need to do more maintenance than regular floor and Clean, I hope that Xiaobian's sharing can let everyone know more about cork flooring.
Alnico materials (composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements including titanium and copper) permit design latitudes providing high indications, high energies and relatively high coercivities. AlNiCo Magnets are characterized by excellent temperature stability and good resistance to demagnetization from vibration and shock. Alnico Magnets offer the best temperature characteristics of any standard production magnet material available. They can be used for continuous duty applications where temperature extremes up to 930F can be expected. AlNiCo Magnet , alnico magnets, Alnico Bar Magnet, alnico horseshoe magnet
Alnico magnetsl are manufactured through either a casting or sintering process. Alnico Magnet is very hard and brittle. Machining or drilling can not therefore be accomplished by ordinary methods.Holes are usually cored in at the foundry. Magnets are cast or sintered as closely as possible to required sized so that abrasive grinding to finish dimensions and tolerances is minimized
Specialized casting techniques used to achieve the unique crystalline grain orientation found in the alnico 5 and 8 grades.These anisotropic grades are designed to produce high magnetic output in a specified direction.Orientation is achieved during heat treatment, by cooling the casting from 2000F at a controlled rate within a magnetic field which conforms to the preferred direction of magnetization. Alnico 5 and Alnico 8 are anisotropicand exhibit a preferred direction of orientation,Magnetic orientation should be specified on your drawing when you send an order to us. alnico magnet, alnico magnets
Cast Alnico 5 is the most commonly used of all the cast Alnico's .It combines high indications with a high energy product of 5 MGOe or more and is used extensively in rotation machinery, communications, meters and instruments, sensing devices and holding applications. The higher resistance to demagnetization(coercive force) of Alnico 8,cobalt content to 35%,allows this material to function well for short lengths or for length to diameter ratios of less than 2 to 1.
Sintered Alnico materials offer slightly lower magnetic properties butbutter mechanical characteristics than the cast Alnico materials.Sintered Alnico magnets are most suitable in small sizes(less than 1 oz.)in this process. The desired mix of metal powder is pressed to shape and size in a die,then sintered at 2300 F in a hydrogen atmosphere.The sintering process is well suited to large volume production,and results in parts which are structurally stronger than cast magnets.Relatively close tolerances can be achieved without grinding. alnico magnet, alnico magnets
The Characteristics of Alnico Magnet:
*Small changes in magnetic properties to temperature effects
*Maximum working temperature can be as high as 450oC~550oC.
*Low coercive force.
*Strong corrosion resistance capability,no coating needed for surface protection.
Typical Applications for Alnico magnet:
Widely used applications such as instruments and meters which require very stable temperature properties.
Electronic ignition systems, watt bour meters, volt-amp meters. medical instruments, industrial motors, magnetic reed switches, generators, hand tools, vending machines. alnico magnet, alnico magnets
|
Grade |
Br |
Hc |
(BH)max |
MMPA Equivalent |
Temp. Coefficient α (Br) |
Tc |
Tw |
|||
|
mT |
KGs |
KA/M |
Oe |
KJ/m3 |
MGOe |
%/oC |
oC |
oC |
||
|
LN9 |
690 |
6.9 |
37 |
470 |
10.0 |
1.25 |
Alnico1 |
-0.03 |
760 |
500 |
|
LNG12 |
700 |
7 |
40 |
500 |
12.0 |
1.50 |
Alnico2 |
-0.03 |
810 |
500 |
|
*LNG13 |
680 |
6.8 |
48 |
600 |
12.0 |
1.50 |
Alnico2 |
-0.03 |
810 |
500 |
|
*LN10 |
600 |
6 |
40 |
500 |
10 |
1.2 |
Alnico3 |
-0.03 |
760 |
500 |
|
LNGT18 |
580 |
5.8 |
90 |
1130 |
18.0 |
2.20 |
[l.Alnico7] |
-0.03 |
860 |
500 |
|
LNG16 |
800 |
8 |
53 |
660 |
16.0 |
2.00 |
[Alnico4] |
-0.02 |
850 |
500 |
|
LNG34 |
1180 |
11.8 |
44 |
550 |
35.0 |
4.30 |
[Alnico5C] |
-0.02 |
890 |
500 |
|
LNG37 |
1180 |
11.8 |
48 |
600 |
37.0 |
4.65 |
Alnico 5 |
-0.02 |
890 |
500 |
|
LNG40 |
1220 |
12.2 |
48 |
600 |
40.0 |
5.00 |
-0.02 |
890 |
500 |
|
|
LNG44 |
1220 |
12.2 |
52 |
650 |
44.0 |
5.50 |
Alnico 5 DG |
-0.02 |
890 |
500 |
|
LNG 52 |
1250 |
12.5 |
55 |
690 |
52.0 |
6.50 |
Alnico 5-7 |
-0.02 |
890 |
550 |
|
LNG60 |
1300 |
13 |
56 |
700 |
60.0 |
7.50 |
Alnico 6 |
-0.02 |
890 |
500 |
|
LNGT28 |
1050 |
10.50 |
56 |
700 |
28.0 |
3.50 |
Alnico 8 |
-0.02 |
860 |
550 |
|
LNGT32 |
800 |
8 |
104 |
1300 |
34 |
4.25 |
-0.03 |
860 |
550 |
|
|
LNGT38 |
820 |
8.2 |
110 |
1380 |
38.0 |
4.75 |
-0.03 |
860 |
550 |
|
|
LNGT44 |
880 |
8.8 |
120 |
1500 |
44.0 |
5.50 |
-0.03 |
860 |
550 |
|
|
LNGT60 |
900 |
9 |
110 |
1380 |
60 |
7.5 |
Alnico 9 |
-0.03 |
860 |
550 |
|
LNGT72 |
1050 |
10.5 |
112 |
1410 |
72 |
9 |
|
-0.03 |
860 |
550 |
|
LNGT36J |
700 |
7 |
140 |
1750 |
36 |
4.5 |
Alnico 8HC |
-0.03 |
860 |
550 |
Demagnetization Curve of Cast Alnico
Alnico Magnets, Cast Alnico Magnet, Cast Block Alnico Magnets
Ningbo Besten Magnet Co., Ltd. , https://www.bestenmagnets.com