The processing requirements of large-size aluminum square pass need to introduce the problem when processing large-size aluminum square pass processing? Here is a brief introduction for everyone.
The preferred large-size aluminum square refers to aluminum square products with a height of more than 100 mm and a bottom width of more than 80 mm. Since the aluminum square pass has a relatively large expansion area, the processing requirements are relatively high. Generally, the thickness of the aluminum square of this specification is at least 0.9 or more to ensure that the product itself is not deformed. If the aluminum alloy square processing length requirement is relatively long, the thickness requirement for the aluminum square pass is higher. Usually the processing thickness is above 1.0. And wooden boxes have to be added during the transportation process.
Aluminum squares with larger specifications are best processed with aluminum profiles. This aluminum square effect is ideal. It is horizontal and vertical, and the toughness is very good. The decorative effect is natural.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Epoxy Anti - Static Level Coating
Scope of adaptation:
Walls, floors and storage tanks for all kinds of antistatic factories such as electronics, microelectronics, telecommunications, computers, precision instruments, textiles, printing, powders, chemicals, organic solvents.Performance characteristics:
1, excellent anti-static lasting effect, the use of static black carbon fiber manufacturing,
2, dust-proof, moisture-proof, wear-resistant;
3,Smooth surface.
Generally 5 years or more
1,Base surface treatment;
2,Brush seal primer
3,Laying copper foils
4,Trowel coated epoxy conductive coating
5,Grinding, vacuuming
6,Roll coating anti static epoxy coating
Technical index:
|
project |
index |
|
|
Drying time |
Table dry |
≤4 |
|
Hard work |
≤24 |
|
|
Adhesion (grade) |
≤I |
|
|
Pencil hardness |
≥2H |
|
|
Impact resistance |
40 Pass |
|
|
Flexibility |
3mm Pass |
|
|
Wear resistance(750g/500r,weightlessness,g) |
≤0.03 |
|
|
Water resistance |
48 hours no change |
|
|
Resistant to 10% sulfuric acid |
56 days no change |
|
|
Resistance to 10% sodium hydroxide |
56 days no change |
|
|
Gas-resistant, 120% " |
56 days no change |
|
|
Surface resistance |
105-108 |
|
|
Volume resistance |
105-108 |
|
Epoxy Anti - Static Level Coating
Epoxy Anti - Static Level Coating,Anti-Static Epoxy Topcoat,Epoxy Topcoat Material,Epoxy Finish Antistatic Material,Epoxy Antistatic Self-Leveling Floor
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com