First, because the wood itself will heat expansion and contraction, can not be directly exposed to the sun or by the cold wind, if not longer than two months, the barrel can be wet and sealed with a large plastic bag to avoid air away water.
Second, when the barrel is shipped from the factory, it will be coated with a layer of tung oil. Therefore, in the first few days of purchase, it is necessary to keep the air circulation in the bathroom and regularly open the window for ventilation so as not to make the home full of pungent taste.
Third, the initial test of water will appear water seepage, this is a normal phenomenon, the water should be soaked for more than 12 hours, so that the barrel fully infiltrated, the barrel of water seepage phenomenon will stop, if there is a problem, it should contact the manufacturer in a timely manner .
4. After the barrel is used for a period of time, the iron wire fixed outside the barrel may be loosened. At this time, the barrel can be inverted first, and then the iron wire can be tightened and added into the hot water to continue to be used.
Fifth, usually when not in use, it is best to put a little clear water, make it absorb moisture, keep the wood saturated and moist, but the water should not be too much, because the bathroom itself has a certain humidity. Care must be taken not to use dirty water after bathing so as to prevent wood from absorbing sewage and accelerating aging or mold.
6. There will be differences in the thickness of the wood in the barrel wall. Generally, a barrel with a barrel wall thickness of between 2 cm and 3 cm is the best choice.
Bathtub bathroom window
Previous The correct choice and maintenance of the bathtub
Next Yuba top ten brands ranking
What's the difference between baths with different materials? Bathtub maintenance is something we all need to understand, not only relates to our health but also the protection of our lives.
Nowadays, more and more families use cork flooring in their decoration. However, how to maintain cork flooring has always been a headache for netizens. Here are the top five tricks to help you easily fix cork flooring.
Bamboo flooring raw materials have a longer growth cycle than wood flooring, and the environmental protection coefficient is also higher. Many people now like to buy bamboo flooring. Bamboo flooring should also pay attention to:
In the home improvement, the floor is indispensable, and the floor material is also different. Raw materials have a longer growth cycle than wood flooring, and the environmental factor is also higher. Many people now like to buy bamboo flooring. Bamboo flooring should also pay attention to:
The elegance of laminate flooring has conquered many people, but prolonged use will cause the floor to lose its original luster. The use of the process can not be ignored in the maintenance and repair of the floor, only good conservation, in order to make the floor consistent, all-round display of its beauty.
submit
Ningbo Actmix produces the Zinc Dialkyldithiophosphate salt, Actmix®ZDTP-50, Actmix®ZBPD-50, Actmix®ZDTP-50, Actmix®ZAT-70 etc. It is non-staining specialty accelerator for rapid vulcanization of EPDM and other synthetic rubbers ,not containing any secondary amines which can form N-nitrosamines; With excellent non-blooming characteristic.
The Zinc dialkyldithiophosphate salt is a special accelerator for EPDM which contains sulphur, ZnO, thiazoles and thiurams accelerator. It can lead to high degree of cross-linking and no blooming with maximum usage dosages recommended.
Zinc Dialkyldithiophosphate Salt Accelerator
Zinc Dialkyldithiophosphate Salt Accelerator,Quality Zinc Dialkyldithiophosphate Salt Accelerator,Zinc Dialkyldithiophosphate, Dialkyldithiophosphate Salt Accelerator
Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com